ZYC SIMPO FlexVolt 32 kWh Battery Pack

ZYC SIMPO FlexVolt 32 kWh Battery Pack: complete, ready-to-install system

The ZYC SIMPO FlexVolt is the battery of 48 V high-capacity from ZYC Energy: a compact unit that stacks 8 kWh modules beneath its BMS unit, without screws and with plug-in terminals, and which delivers 200 continuous — more than enough power to run a large inverter at full capacity without having to stack extra modules.

This pack consists of two complete systems stacked vertically: four 8 kWh modules and two BMS units, totalling 32 kWh whilst taking up the same floor space as a single unit.

What is included

• 4 × FlexVolt 8 kWh battery module
• 2 × FlexVolt BMS Unit

System specifications

Why this battery?

• 200 continuous. A single system powers an inverter that is under sustained load.
• Density. 16 kWh in a floor area of 0.82 × 0.24 m, and 32 kWh in the same space when stacked.
• IP65. Indoors or outdoors, without an additional cupboard.
• Over 8,000 cycles and a 10-year guarantee.
• Grows with you: up to 80 systems in parallel, over 1.28 MWh.

Watch out for the cold: The FlexVolt charges from 0 °C. If the battery is going to be kept somewhere where the temperature drops below zero, the ZYC option is the SIMPO 5000, which can handle temperatures as low as −10 °C.

Compatibility

The SIMPO FlexVolt is a battery that 48 V (51.2 V nominal) with communication CAN / RS485, compatible with standard low-voltage inverters available on the market, whether connected to the grid, operating in off-grid mode or as a backup. Please confirm the inverter model with us before ordering and we’ll let you know the exact configuration.

The full range, documentation and support at the ZYC Energy brand page.