- Free shipping to mainland Spain for orders over 300€.
Single-phase voltage stabiliser with servomotor, 15 kVA (12 kW), 230 V ±21 TP65T
868,30€
TAXES INC.
- Power: 15 kVA (15,000 VA – 12,000 W)
- Entry: Single-phase 160V – 270V
- Stabilised output: Single-phase 230V ± 2%
- Electromechanical control via a servomotor, with manual bypass
- Overcurrent, overvoltage and undervoltage protection · pure sine wave
- Dimensions: 30 x 40 x 53 cm (Width x Depth x Height) · 50 kg
Available on back-order
Bajo pedido a fábrica · Se envía al recibirlo en nuestro almacén (1-3 semanas + transporte)
Details of the Single-phase voltage stabiliser with servomotor, 15 kVA (12 kW), 230 V ±21 TP65T
Single-phase voltage stabiliser with servomotor, 15 kVA (12 kW), 230 V ±21 TP65T – FVC-M1-15
The M1-15 single-phase voltage stabiliser automatically corrects voltage dips and surges in the mains supply and delivers a constant output voltage of 230V ± 2%. It operates using a servomotor-driven variac and a step-up transformer: the electronic control system continuously compares the input voltage with an internal reference and adjusts the variac to maintain the output within a very narrow range.
As it is a continuous regulation system (rather than step-by-step), the output voltage is stable and clean, making it ideal for sensitive loads. It features a manual bypass for maintenance or to continue supplying power to the load directly from the mains if necessary.
When do you need a stabiliser?
- Installations at the end of the line or in rural areas where the voltage drops significantly at peak times or rises excessively.
- When a photovoltaic inverter is disconnected due to overvoltage or undervoltage in the grid.
- To protect electronic and IT equipment, air-conditioning systems, pumps, boilers, and medical or safety equipment that are sensitive to voltage fluctuations.
How to choose the power rating
The power rating given is apparent power (kVA). Add up the power of the loads you are going to connect and allow a margin of at least 20–30 %; if there are motors, compressors or pumps, take their peak starting current into account. This model supports an output of up to 52A.
Technical specifications
| Model | M1-15 |
| Power | 15 kVA (15,000 VA – 12,000 W) |
| Maximum output current (apparent) | 52A |
| Input voltage range | Single-phase 160V – 270V |
| Operating frequency | 47–64 Hz |
| Input protection | Overcurrent / High and low voltage |
| Output voltage range | Single-phase 230V ± 2% |
| Overload | 200% for 10 seconds |
| Output cut-off voltage | 180–260 V |
| Output waveform | Pure sine wave |
| Output protection | Overcurrent |
| Power factor | 0,8 |
| Measurement and indicators | Input (V) / Output (V) / Output current (A) |
| Continuous operating time at full load | 0…105% |
| Permanent load < 105% | < 24/7 |
| Loading efficiency | > 96% |
| Operating ambient temperature | -40°C to +55°C |
| Storage temperature | -25°C to +60°C |
| Enclosure protection rating | IP21 |
| Noise level | < 50 dB |
| Dimensions | 30 x 40 x 53 cm (Width x Depth x Height) |
| Weight | 50 kg |
| Regulations | UNE-EN 61558 / UNE-EN 60204 |
Installation
- IP21 equipment: install indoors, in a dry and well-ventilated location.
- Protect the supply line with a suitable circuit breaker and residual current device.
- Installation must be carried out by an authorised installer in accordance with the REBT.
Not sure what power rating you need? Drop us a line with the power consumption figures for your system and we’ll help you choose.
Weight and dimensions
| Weight | 52 kg |
|---|---|
| Dimensions | 34 × 44 × 57 cm |
Reviews
There are no reviews yet.