The smartest battery monitor on the market. Meet the actual state of your battery in real time with the Victron Energy SmartShunt 500A.
The Victron SmartShunt is an all-in-one battery monitor that replaces the traditional shunt shunt. It integrates Bluetooth and VE.Direct port so you always know instantly the actual status of your battery without the need for a separate display.
| Available models | 500A / 1000A |
| Voltage range | 8 - 70V DC |
| Maximum current | 500A / 1000A |
| Accuracy | ±0.4% voltage / ±0.04% current |
| Connectivity | Bluetooth + VE.Direct |
| Operating temperature | -40°C to +50°C |
| Battery compatibility | Lithium, AGM, GEL, OPzS |
Which one do you need? Both are Victron battery monitors. The key difference is the integrated display.
💡 Recommendation FVComponents: If you already use VictronConnect regularly → SmartShunt. If you want to view data without a mobile phone → BMV-712.
Installing the SmartShunt is easy. You just need some basic tools and follow these steps.
Always disconnect the negative terminal of the battery before starting. Work safely.
The SmartShunt goes in the negative pole. Terminal B1 to battery negative, B2 to all loads and chargers.
The thin red wire (voltage reference) goes to the positive pole of the battery, protected by a 1A fuse near the battery.
Follow these steps to set up the SmartShunt correctly and get accurate readings from day one.
To properly synchronise the 100%: Fully charge the battery until the absorption current drops to 2-4% of rated capacity. The SmartShunt will automatically detect this state and adjust the SOC to 100%.
The SmartShunt is versatile and adapts perfectly to any type of battery-powered installation.
Precise control of the battery bank in 12V or 24V installations. Know exactly how much autonomy you have left.
Marine service bench monitoring. NMEA 2000 compatible via adapter.
Seamless integration with Victron inverters and VRM Portal for 24/7 remote monitoring.
It monitors large capacity service batteries with the same accuracy as professional equipment.
The Victron SmartShunt is available in our shop with official warranty and shipping in 24-48h to all Spain.
To the whole of mainland Spain
5 years Victron Energy
Victron Experts
🔋 LiFePO4 LITHIUM BATTERY - NEW GENERATION Victron Lithium SuperPack NGLThe Battery that Changes Everything The new generation of Victron lithium batteries with integrated intelligent BMS. Maximum safety, durability and performance for your solar or mobile installation. 50/100Ah Capacities LiFePO4 Lithium iron chemistry +2500 Life cycles BMS Integrated intelligent Bluetooth Monitoring Plug&Play Installation
⚡ PURE WAVE INVERTER - COMPLETE GUIDE Phoenix Inverter VE.Direct 12/1600Everything you need to know The most reliable pure sine wave inverter for 12V installations. Converts your battery power into quality 230V AC to power any electronic equipment. 1600VA Nominal power 3000VA Peak power 30 sec. 12V DC Input voltage 230V
How to charge only with solar surplus with your Fronius Wattpilot charger. If you have batteries in your Fronius GEN24 inverter and you want to know how to configure your Fronius Wattpilot charger so that it does NOT use the battery to charge your electric vehicle and ONLY uses the photovoltaic solar surplus, you are in the right place... In this post
The perfect combo; Victron Multiplus II 48/5000 + Pylontech US5000 Yes, most off-grid solar installations with batteries are nowadays made with this combination of Victron inverter charger and the famous Pylontech batteries. In terms of quality/price ratio, this is an excellent combination that provides all the guarantees and
