The most reliable pure sine wave inverter for 12V installations. Converts your battery power into 230V AC quality to power any electronic equipment.
With 1300W continuous and 3000W peak, the Phoenix 12/1600 can power most home and work equipment in your mobile or off-grid installation.
20-100W - No problem
800-1200W - Works perfectly
Up to 1200W continuous
50-300W - Prolonged use without problems
1800W+ - Exceeds power, use with caution.
Both are pure wave Victron inverters, but have very different functionalities. Make the right choice for your installation.
💡 Only off-grid solar batteries? → Phoenix. Campsites, grid-connected van? → MultiPlus-II.
Electrical requirements and steps for safe installation of the Phoenix 12/1600.
| Power | Minimum cable cross-section | Fuse |
| 1600 VA (full load) | 25 mm² (1.5 in²) | 160A |
| 800 VA (average use) | 16 mm² 16 mm² 16 mm² 16 mm² 16 mm² 16 mm² 16 mm² 16 mm² 16 mm | 100A |
| Max. cable length | As short as possible (<1m ideal) | |
Choose the location: ventilated, away from humidity and close to the battery.
Connect DC cables of suitable cross-section with fuse on the positive side
Install an accessible on/off switch for manual control of the inverter.
Connect the AC output to the distribution board or directly to the sockets.
The Phoenix is the reference inverter for off-grid installations.
Two features that make the difference in the daily use of the Phoenix 12/1600.
Consumes only 2W in standby
In ECO Mode, the inverter periodically “sleeps” and wakes up to detect if a load is connected. If detected, it starts up completely within milliseconds. This is ideal when you don't know if you are going to use the inverter but want to have it available.
Remote monitoring and control
The VE.Direct port allows the Phoenix to be connected to the Victron device network to monitor its status, alarm history and parameters from VictronConnect or VRM Portal.
The Phoenix VE.Direct 12/1600 is available in our shop with official Victron warranty and shipping in 24-48h to all Spain.
All of mainland Spain
Official Victron Warranty
Victron Experts
🔋 LiFePO4 LITHIUM BATTERY - NEW GENERATION Victron Lithium SuperPack NGLThe Battery that Changes Everything The new generation of Victron lithium batteries with integrated intelligent BMS. Maximum safety, durability and performance for your solar or mobile installation. 50/100Ah Capacities LiFePO4 Lithium iron chemistry +2500 Life cycles BMS Integrated intelligent Bluetooth Monitoring Plug&Play Installation
📊 BATTERY MONITOR - COMPLETE GUIDE Victron SmartShuntInstallation and Setup Guide The smartest battery monitor on the market. Know the real status of your battery in real time with the Victron Energy SmartShunt 500A. 500A Max Current Bluetooth Integrated VE.Direct Connectivity 8-70V Operating Voltage ±0.4% Accuracy WHAT IS THE SMARTSHUNT? The
How to charge only with solar surplus with your Fronius Wattpilot charger. If you have batteries in your Fronius GEN24 inverter and you want to know how to configure your Fronius Wattpilot charger so that it does NOT use the battery to charge your electric vehicle and ONLY uses the photovoltaic solar surplus, you are in the right place... In this post
The perfect combo; Victron Multiplus II 48/5000 + Pylontech US5000 Yes, most off-grid solar installations with batteries are nowadays made with this combination of Victron inverter charger and the famous Pylontech batteries. In terms of quality/price ratio, this is an excellent combination that provides all the guarantees and
