Victron NS 22 kW Electric Car Charger - EVC200300200

Features of the Victron NS 22 kW Electric Car Charger - EVC200300200

The Victron NS 22 kW electric car charger - EVC200300200 can operate in three-phase and single-phase mode. It provides a maximum of 22 kW AC in three-phase mode and 7.3 kW in single-phase mode.

The device is technically identical to the Victron Electric Car Charger 22 kW - EVC300400300but with a new, modern design available in three colours and without the integrated LCD display. Initial installation, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi access point or WiFi LAN.

WiFi communication

WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Station mode for initial configuration and monitoring.

Easy operation and control via Bluetooth and the application VictronConnect

Complete control and overview of all operating parameters and session statistics at a glance.

Light ring for a quick overview of the device status

Fully programmable RGB light ring around the charging port to quickly determine the status of the device. It can be programmed from the integrated web interface to display different light effects depending on the current status (offline, charging, charging, etc.).

Victron NS 22 kW electric car charger - EVC200300200. Three working modes available:

1. Manual mode for setting the output current
   The manual mode allows the output current to be set between 6 and 32 A. The charging power is controlled in two ways: with the LCD touch screen bar or with its web page. It allows you to manually start or stop the charging process when a vehicle is connected to the electric car charger.
2. Automatic mode to ensure maximum system efficiency
   It detects when there is excess energy and uses only that energy to charge the vehicle.
3. Mode programmed to charge the electric vehicle at certain time intervals.
   A fully programmable scheduler allows charging at different time intervals, e.g. at certain times of the night when grid power is cheapest.

Aesthetics of the Victron NS 22 kW Electric Car Charger - EVC200300200

Give your charger a more sophisticated look with these black or white cases:

• White housing for Victron NS electric car charger - EVC200300410
• Black housing for Victron NS electric car charger - EVC200300310

Integration with GX device and VRM

The charger can be fully integrated and remotely controlled via a Victron Energy GX device and VRM.

This Victron NS 22 kW electric car charger - EVC200300200 not only fully integrates with a Victron Energy GX device and VRM; if you have solar panels, you can configure it so that excess solar energy directly charges the vehicle. Manual mode and programmed modes offer even more flexibility to meet the needs of the electric vehicle depending on the system.

Datasheet Victron NS 22 kW Electric Car Charger - EVC200300200

View Victron NS 22 kW electric car charger data sheet - EVC200300200