Aluminium structure kit for 1 vertical panel. 30º. On sheet metal roof. Sunfer 11V1_30

Aluminium structure kit for 1 vertical panel at 15º or 30º on a sheet metal roof. Sunfer 11V1_30

The Sunfer 11V1_30 aluminium structure kit for 1 vertical panel at 15º or 30º on a sheet metal roof is made of high-strength EN AW 6005A T6 aluminium, specifically designed to be installed on flat sheet metal roofs or other types of metal substructures. This structure must be anchored to the purlins on which the roof rests. It is a pre-assembled support with a standard inclination that can be adjusted to 15º or 30º to place the panels in a vertical position. It accepts modules of a maximum size of 2279 x 1150 mm and a thickness of between 30 and 45 mm, covering a wide range of models and manufacturers, such as the panels from JA Solar that you can find on our website.

This structure of Sunfer is designed to withstand winds of up to 150 km/h, which on the Beaufort scale is equivalent to a hurricane force wind capable of blowing vehicles over. This ensures that it can be installed on the vast majority of roofs without risk of damage from exposure to normal wind force. To ensure resistance to the maximum design speed, suitable anchorages must be used and the ballast specified by the manufacturer for each situation must be used.

Includes A2-70 stainless steel screws for assembly. Does not include screws for surface anchoring.

Technical sheet aluminium structure kit for 1 vertical panel at 15º or 30º on a sheet metal roof. Sunfer 11V1_30

See technical data sheet of the aluminium structure kit for 1 vertical panel at 15º or 30º. On sheet metal roof. Sunfer 11V1_30