Battery Victron Peak Power Pack 12,8V/30Ah 384Wh - PPP012030000

Victron Peak Power Pack 12,8V/30Ah 384Wh Battery - PPP012030000: Lightweight and easy to install

The Victron Peak Power Pack 12.8V/30Ah 384Wh - PPP012030000 is ideal for mobile applications.

Effective protection against misuse

Ideal for solar power and other applications where excessive discharge could quickly cause damage to lead-acid batteries.

Output 1 "mover": high-capacity output for caravan control systems and other energy-intensive applications.

Ideal for manoeuvring caravans (caravan movers).
Short-circuit proof.
Protected against excessive discharge.

Output 2 "domestic": for low-power DC loads

Designed for lighting, audio and video, pumps, refrigerators.
Short-circuit proof.
Protected against excessive discharge.

Input 1 "car/solar": charged while driving or with a solar panel.

Equipped with voltage and current control for safe charging of the Lithium-Ion battery. In fact, any electrical power source can be connected to this input (e.g. an alternator or a battery charger) as long as 11 V < Vin < 25V.
The current limit is automatically set to a safe value.

Input 2 "adapter": the adapter supplied with the Peak Power Pack can be connected to this input.

Battery charging current: 3A, and suitable for 110/230V power supply.

Fast charging is possible via output 1 (high capacity output and 30Ah/40Ah models only).

A battery charger or inverter/charger can be connected to the high capacity output. The maximum charging current is 15A and 20A respectively and the maximum recommended charging voltage is 14V (maximum 14.2V).

Victron Peak Power Pack 12,8V/30Ah 384Wh Battery - PPP012030000: Storage Mode

Reduces power consumption to virtually zero. Prevents damage due to excessive discharge during battery storage.

Victron Peak Power Pack 12,8V/30Ah 384Wh Battery - PPP012030000: Remote control with status indicator

Push button (supplied) with two-colour LED status indicator:
Short press of the button: activates the high capacity output for 30 minutes (applications such as movers), red LED.
2 second press: high capacity output permanently activated, red LED flashes slowly.
Press for 5 seconds: storage mode, blue LED, flashes 10 times.
Battery is charged via input 1, blue LED flashes slowly.
Fully charged battery, blue LED indicator.
Overload or overheating, red LED flashes.

VE.Direct port: for connection to a PC or smartphone

(A VE.Direct to USB cable or a VE.Direct Bluetooth Smart dongle is required.)

Operation:
Output1: on/30 minute timer/off
Output 2: on/off
Input 1: on/off

Monitoring:
Battery voltage
Temperature and alarms

Datasheet Victron Peak Power Pack 12,8V/30Ah 384Wh Battery - PPP012030000

View Victron Peak Power Pack 12,8V/30Ah 384Wh - PPP012030000 Battery datasheet