Medium 12V 380W 2.56 kWh solar kit for CCTV cameras

From 1.430,93€

TAXES INC.

Solar kit for 3–4 IP cameras + 4G recorder/router (up to ~25 W continuous, 24 hours). 2 x Victron 190 W solar panels, SmartSolar MPPT 100/30 controller, SuperPack 12.8 V 200 Ah battery (2.56 kWh) and Smart BatteryProtect. Approximate runtime of 4 days without sunlight.

Disponible para la venta · Plazo de entrega según stock de la referencia
Product
Finance your purchase with Cetelem
Reference: KIT-VIG-44148 Categories: ,

Details of the Medium 12V 380W 2.56 kWh solar kit for CCTV cameras

Medium 12V 380W 2.56 kWh solar kit for CCTV cameras

Solar kit for powering surveillance cameras in areas without mains electricity in installations comprising 3 or 4 IP cameras with a 4G router or a small DVR: industrial units, estates, farms, car parks or housing estates without a nearby power supply.

Features

  • Recommended continuous intake: up to 25 W (around 600 Wh a day)
  • LiFePO4 lithium battery from 2.56 kWh: a few 4 days’ battery life without sunshine
  • Winter generation: around 800 Wh/day in the south-east of the Iberian Peninsula
  • Smart BatteryProtect: cuts off power before a deep discharge and reconnects it when recharging
  • 12 V DC output for cameras, router and recorder
  • Bluetooth monitoring using the VictronConnect app

Example: 4 × 4 W IP cameras + 5 W 4G router + 4 W PoE switch = 25 W × 24 h = 600 Wh/day.

What’s included in the kit

  • 2× Victron 190 W 24 V monocrystalline solar panel (connected in parallel)
  • 1× Victron SmartSolar MPPT 100/30 regulator
  • 1× Victron SuperPack LiFePO4 battery, 12.8 V, 200 Ah
  • 1× Victron Smart BatteryProtect 12/24 V 65 A
  • 2× MIDI fuse holders with 40 A fuses
  • 1× ON/OFF battery switch
  • 2× pairs of MC4 connectors
  • 30 m of 4 mm² solar cable (15 m red and 15 m black)

What is not included

Cameras, recorder, 4G router, PoE switch, waterproof case for the battery and regulator, mounting plate and pole. Please ask us if you’d like the complete set.

Compare the three sizes in this category solar kits for CCTV cameras or read our guide how to install CCTV cameras where there is no electricity supply.

Frequently asked questions

Does it work with any brand of camera?

Yes. The kit supplies 12 V DC, the voltage at which most IP and analogue cameras, 4G routers and many recorders operate. If your cameras are PoE-enabled, add a PoE switch with a 12 V input or a step-up PoE injector. Avoid powering the cameras via a 230 V inverter and its transformers: this results in a loss of between 15 and 25 % of power and reduces battery life.

How many cameras can I connect?

Up to around 25 W of continuous power consumption: for example, 4 IP cameras at 4 W each, a 4G router and a small PoE switch. If you add an NVR recorder with a hard drive (8–15 W), you can connect 2 or 3 cameras. For more, choose the Pro kit.

Does it work in winter and on cloudy days?

Yes. The kit is designed to cope with December’s sunlight levels in the south-east of the peninsula, and the battery provides around four days’ runtime without sunlight. In the northern half of Spain or in areas with a lot of fog, choose the larger kit or add an extra panel.

How can I view the cameras on my mobile if there’s no internet connection?

With a 4G router with a data SIM card connected to the kit. The router is not included: you can use your own or order one from us along with the kit. It consumes between 3 and 6 W, which is already factored into the recommended power consumption.

What happens if the battery runs flat?

The Smart BatteryProtect disconnects the cameras before the battery becomes over-discharged and reconnects them when the solar panels recharge it. You can adjust the thresholds from your mobile phone. The SuperPack battery also has its own BMS.

Can I expand it at a later date?

Yes. The MPPT 100/30 regulator supports up to around 440 W of panels at 12 V, so you can fit one more panel if you connect it in parallel with its protection circuit. You can also add a second SuperPack battery in parallel.

Do you need any permits or a certificate?

It requires no connection to the mains or paperwork with the electricity supplier: it is a stand-alone, very low-voltage (12 V) system. It is mounted on a post, wall or roof using a mounting frame for the panel and a waterproof box for the battery and the controller.

Does it include installation?

The kit is sold as a kit. If you are in the Region of Murcia or the surrounding area, our installation partner, ICIDE, can install it for you. For the rest of Spain, we’ll assist you by telephone or email before and after your purchase.

Weight and dimensions

Weight 49,33 kg
Dimensions 148.8 × 67.5 × 26 cm

User feedback

Reviews

There are no reviews yet.

Be the first to review “Kit solar para cámaras de vigilancia Medio 12V 380W 2,56 kWh”

Your email address will not be published. Required fields are marked *

Delivery deadlines

At FVComponentes.com we have stock of the references with the highest turnover, however our catalogue is so wide and economical because we work with many of the references on request. This means that the usual delivery time of 2-4 working days can be extended to 1-2 weeks + subsequent shipment by us. Thanks to this, we can offer very competitive and attractive prices to our customers that are difficult to match. If you wish, you can write to us via the chat on the website, call us at 968 97 83 01 or write to us at comercial@fvcomponentes.com to check if we have stock or the delivery time of the component you wish to purchase before finalising your order.