Inverter 24V Victron Sun 24/250-10 IEC - SIN241251100

Proven reliability

The Victron Sun 24/250-10 IEC 24V inverter - SIN241251100 is short-circuit proof and protected against overheating, whether due to overload or ambient temperature. The full bridge plus toroidal transformer topology has proven its reliability over many years. high.

Victron Sun 24/250-10 IEC 24V Inverter High Starting Power Inverter - SIN241251100

Necessary for starting loads such as converters for LED lamps, halogen lamps or power tools.

ECO Mode

In ECO mode, the inverter switches to standby when loads drop below a preset value (minimum load: 15 W). Once in standby, the inverter will switch on briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.

Remote on/off switch

The Phoenix Inverter Control VE.Direct Remote panel (not included) can be used to switch the inverter on and off remotely. Another option is to connect a remote on/off switch to a two-pole connector or between the battery positive and the left contact of the two-pole connector.

Bluetooth

The parameters of the 24V Sun 24/250-10 IEC inverter - SIN241251100 and the solar charger can be read and monitored via Bluetooth through the VictronConnect application.

Victron Sun 24/250-10 IEC 24V Inverter VE.Direct communication port - SIN241251100

This port can be used to connect to a GX device, GlobalLink 520, for monitoring via the VRM portal or to connect to a computer for monitoring or configuration with the VictronConnect application.

Monitoring via the VictronConnect app or the GX device:

• Inverter input and output voltage and percentage of loads.
• Solar power, voltage and current.
• Operational status and alarms.

Fully configurable with the VictronConnect application:

• Alarm trip levels and low battery voltage reset.
• Low battery voltage cut-off and reset levels.
• Dynamic disconnection: load-dependent disconnection level.
• Output voltage 210 - 245 V and frequency 50 Hz or 60 Hz.
• ECO mode on/off and ECO mode detection level.
• Battery charging current, algorithm and voltages.
• Battery charge temperature compensation or low temperature cut-off level.

DC and PV connections with screw terminals

No cable lugs or special tools are required for this installation.

Available with an IEC-320 socket

An IEC-320 male plug is included.

Datasheet 24V Inverter Victron Sun 24/250-10 IEC - SIN241251100

View Victron Sun 24V Inverter 24/250-10 IEC - SIN241251100 datasheet