- Free shipping to mainland Spain for orders over 300€.
Details of the Inverter Charger 24V Victron EasySolar II GX 24/3000 70A-32A MPPT 250/70
Features of the Inverter Charger 24V Victron EasySolar II GX 24/3000 70-32 MPPT 250/70 - PMP242307010
The all-in-one solar energy solution
The Victron EasySolar-II GX integrates the following elements:
- A MultiPlus-II inverter/charger.
- A SmartSolar MPPT -Tr solar charge controller.
- A GX device with a 2 x 16 character display.
These elements are pre-connected into a single unit. This greatly simplifies most installations, saving time and money.
Display and Wi-Fi
The display shows parameters of the battery, inverter and solar charge controller. The system can be configured and parameters can be changed via Wi-Fi; these parameters can also be queried with a smartphone or other network-enabled device.
Inverter Charger 24V solar charge controller Victron EasySolar II GX 24/3000 70-32 MPPT 250/70 - PMP242307010
The DC output of the SmartSolar MPPT is connected in parallel with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.
GX Device
The integrated GX device includes:
- A BMS-Can interface. This interface can be used to connect to a battery managed by a compatible CAN-bus. This port is not compatible with VE.Can.
- One USB port.
- One Ethernet port.
- A VE.Direct port.
The GX device controls the MultiPlus-II and the SmartSolar MPPT with a VE.Bus and a VE.Direct connection respectively.
Topology in line with the network
The EasySolar-II GX uses excess PV power to charge the batteries or to feed power back into the grid, and discharges the battery or uses grid power to supplement the lack of PV power. In the event of a power outage, the Victron EasySolar II GX 24/3000 70-32 MPPT 250/70 - PMP242307010 24V inverter charger will disconnect from the grid and continue to power the loads. Loads that should be shut down when AC input power is not available can be connected to a second output (not shown). The PowerControl and PowerAssist functions take these loads into account and limit the AC input current to a safe value.
Parallel network topology
The EasySolar-II GX will use the data of the external AC current sensor or energy meter to optimise self-consumption and, if necessary, avoid feeding surplus solar energy back into the grid. In the event of a power failure, the Victron EasySolar II GX 24/3000 70-32 MPPT 250/70 - PMP242307010 24V inverter charger will continue to supply critical loads.
Weight and dimensions
| Weight | 28,000 kg |
|---|---|
| Dimensions | 32.5 × 59 × 35 cm |
Reviews
There are no reviews yet.