You must be logged in to post a review.
- Free shipping to mainland Spain for orders over 300€.
Inverter Victron Multiplus 48/3000VA 35-50A - PMP483021010
783,56€
TAXES INC.
- Continuous power output: 3000VA
- Inverter Peak Power: 6000W
- Inverter Operating Voltage: 48V
- Inverter Efficiency: Pure Sine Wave
- Weight of the Investor: 18kg
- Inverter Dimensions: 362 x 258 x 218mm
Producto disponible para la venta
Finance your purchase with Cetelem
Product information
Inverter Victron Multiplus 48/3000VA 35-50A
Multifunctional
The new Victron Multiplus 48/3000VA 35-50A Inverter has been designed to replace the previous MultiPlus Compact range. It brings together, in a single compact housing, a powerful sine wave inverter, a sophisticated battery charger with variable charging technology and a high-speed AC transfer switch.
Parallel operation
Up to six Victron Multiplus 48/3000VA 35-50A Inverters can be operated in parallel to achieve a higher power output. In addition to parallel connection, three units can be configured for three-phase output by assigning each inverter to one of the three phases.
[one_half]
[/one_half] [one_half_last] [one_half_last] [one_half_half_last].
[/one_half_last]
Uninterruptible alternating current (UPS function)
In the event of a power outage, or disconnection of the shore power or generator, the inverter integrated in the Victron Multiplus 48/3000VA 35-50A Inverter automatically activates and takes over the supply to power the connected loads. This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment continue to operate without interruption.
Remote monitoring and control
When connected to a GX device (e.g. a Cerbo GX) you can monitor and control the Victron Multiplus Inverter and your system(s) locally (LAN) or remotely over the internet from anywhere in the world with the free VRM app and the free portal VRM. Access can be carried out from a phone, tablet or PC with different operating systems.
The level of control is limitless, from the setting of the Victron Multiplus 48/3000VA 35-50A inverter to the automatic start of a standby generator. And much more...
Proven reliability
The full-bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.
PowerControl - Limited power from generator, shore power or mains power
A maximum current from the generator or shore power can be set on the Multi Control Panel. The Victron Multiplus 48/3000VA 35-50A Inverter will take over other AC loads and use the excess current for charging, thus avoiding overloading the generator or the shore power.
PowerAssist - Increasing the electrical capacity of the shore power outlet or generator
When a power peak is required for a short period of time, as is often the case, the Victron Multiplus 48/3000VA 35-50A Inverter will immediately compensate for the possible lack of power from the grid current or generator with power from the battery. When the load is reduced, the excess power is used to recharge the battery.
Variable four-stage charger and charging of dual battery banks
The main output provides a powerful charge to the battery system via advanced "variable charge" software. The software fine-tunes the automatic three-stage process to match battery conditions and adds a fourth stage for extended periods of float.
In addition, the MultiPlus can charge a second battery using a separate limited charge output designed to charge a starter battery from the main engine or generator.
High starting power
Necessary for starting loads with high inrush current, such as converters for LED lamps, halogen lamps or power tools.
Search mode
When the search mode is activated, the consumption of the inverter in no-load operation decreases by approximately 70%. In this mode the Victron Inverter 48/3000VA 20-50A when operating in inverter mode, switches off if there is no load or too little load, and switches back on every two seconds for a short period of time.
If the output current exceeds a preset level, the inverter shall continue to operate. Otherwise, the inverter will shut down again.
Programmable relay
The programmable relay is by default configured as alarm relay, i.e. the relay will be de-energised in case of alarm or pre-alarm (inverter is too hot, input ripple is almost too high and battery voltage is too low).
Datasheet Victron Inverter Multiplus 48/3000VA 35-50A - PMP483021010
Additional information
| Weight | 18 kg |
|---|---|
| Dimensions | 37 × 26 × 22 cm |
Reviews
There are no reviews yet.