You must be logged in to post a review.
- Free shipping to mainland Spain for orders over 300€.
Inverter Victron Multiplus 12V 500VA 20-16A - PMP121500000
340,34€
TAXES INC.
- Inverter Peak Power: 900W
- Inverter Operating Voltage: 12V
- Continuous power output: 500VA
- Inverter Efficiency: Pure Sine Wave
- Weight of the Investor: 4,4Kg
- Inverter Dimensions: 311 x 182 x 100 mm
Producto disponible para la venta
Finance your purchase with Cetelem
Product information
Inverter Victron Multiplus 12V 500VA 20-16A
Multifunctional
The new style Victron Multiplus Inverter 12V 500VA 20-16A has been designed to replace the previous MultiPlus Compact range. It brings together, in a single compact housing, a powerful sine wave inverter, a sophisticated battery charger with variable charging technology and a high-speed AC transfer switch.
Parallel operation and three-phase option
Up to six Multiplus 12V 500VA 20-16A can be operated in parallel to achieve higher power output. In addition to parallel connection, three units can be configured for three-phase output by assigning each inverter to one of the three phases.
[one_half]
[/one_half] [one_half_last] [one_half_last] [one_half_half_last].
[/one_half_last]
Uninterruptible alternating current (UPS function)
In the event of a power failure, or disconnection of the shore power or generator, the Victron Multiplus 12V 500VA 20-16A inverter automatically activates and takes over the supply to power the connected loads. This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment continue to operate without interruption.
Remote monitoring and control
When connected to a GX device (e.g. a Cerbo GX) you can monitor and control the Victron Multiplus Inverter and your system(s) locally (LAN) or remotely over the internet from anywhere in the world with the free VRM app and the free portal VRM. Access can be carried out from a phone, tablet or PC with different operating systems.
The level of control is limitless, from the setting of the Victron Multiplus Inverter 12V 500VA 20-16A to the automatic start of a standby generator. And much more...
Proven reliability
The full-bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.
PowerControl - Limited power from generator, shore power or mains power
In the Multi Control Panel a maximum current from the generator or the dock can be set. The Victron Multiplus Inverter 12V 500VA 20-16A will take over other AC loads and use the excess current for charging, thus avoiding overloading the generator or the shore power.
PowerAssist - Increasing the electrical capacity of the shore power outlet or generator
When a power peak is required for a short period of time, as is often the case, the Victron Multiplus Inverter 12V 500VA 20-16A will immediately compensate for the possible lack of power from the grid current or generator with power from the battery. When the load is reduced, the excess power is used to recharge the battery.
Variable four-stage charger and charging of dual battery banks
The main output provides a powerful charge to the battery system via advanced "variable charge" software. The software fine-tunes the automatic three-stage process to match battery conditions and adds a fourth stage for extended periods of float.
In addition, the MultiPlus can charge a second battery using a separate limited charge output designed to charge a starter battery from the main engine or generator.
High starting power
Necessary for starting loads with high inrush current, such as converters for LED lamps, halogen lamps or power tools.
Search mode
When the search mode is activated, the consumption of the inverter in no-load operation decreases by approximately 70%. In this mode the Victron Multiplus Inverter 12V 500VA 20-16A, when operating in inverter mode, switches off if there is no load or very little load, and switches back on every two seconds for a short period of time.
If the output current exceeds a preset level, the inverter shall continue to operate. Otherwise, the inverter will shut down again.
Programmable relay
The programmable relay is by default configured as alarm relay, i.e. the relay will be de-energised in case of alarm or pre-alarm (inverter is too hot, input ripple is almost too high and battery voltage is too low).
Datasheet Victron Inverter Multiplus 12V 500VA 20-16A - PMP121500000
Download Victron Multiplus schematic for camper vans in PDF format
Enter our blog and download the PDF diagram for wiring and connecting your Victron Multiplus inverter in a camper van. You can find the diagram and much more technical information in our new blog section.
Click to download our schematic Victron Multiplus of our blog.
Additional information
| Weight | 5 kg |
|---|---|
| Dimensions | 31 × 18 × 10 cm |
Reviews
There are no reviews yet.