Inverter Victron Phoenix 12/375 VE Direct Schuko - PIN121371200

Features of the Victron Phoenix Inverter 12/375 VE Direct Schuko - PIN121371200

The Victron VE.Direct communications port allows the PV inverter to be connected to the

• A computer (a VE.Direct to USB interface cable is required).
• Apple and Android smartphones, tablets, mackbooks and other devices (a VE.Direct to Bluetooth Smart dongle is required).

The Victron Phoenix 12/375 VE Direct Schuko Inverter - PIN121371200 is fully configurable:

• Low battery voltage alarm and reconnection levels.
• Low battery voltage shutdown and restart levels.
• Dynamic disconnection: load-dependent disconnection level
• Output voltage 210 - 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode level sensor

ECO mode operation

The Victron Phoenix 12/375 VE Direct Schuko Inverter - PIN121371200 remains in stand-by when the power in Watts of its output falls below a pre-set value. Once in stand-by, the inverter will be activated briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.

High additional peak starting power

One of the characteristics of SinusMax technology is its very high starting power. Phoenix inverters are designed to supply difficult loads, such as motors or power tools with high peak starting power.

Victron Phoenix 12/375 VE Direct Schuko Inverter Remote On/Off Switch - PIN121371200

In this model of solar inverter, Victron Phoenix 12/375 VE Direct Schuko inverter - PIN121371200, you can connect a remote On/Off switch and bring the two wires to the inverter to remotely switch the inverter on and off. This option is one of the most valued by customers with a caravan or a boat or sailboat.

Datasheet Victron Phoenix Inverter 12/375 VE Direct Schuko - PIN121371200

See Phoenix Inverter 12/375 VE Direct Schuko data sheet - PIN121371200