Energy meter Victron ET340 - 3 phase - 65A

The Victron ET340 Energy Meter - 3 phase - 65A measures the power and energy flows of the entire installation from the distribution box. The output of a PV inverter can also be measured. The data will be displayed in the Colour Control GX and the VRM Portal.

The Victron ET340 energy meter is designed exclusively for monitoring a three-phase installation, but can also be used in a single-phase installation (max. 65 A/phase).

Features Victron ET340 Energy Meter - 3 phase - max 65A/phase

The ET340 can be configured with four different functions in one GX device, such as the Victron Cerbo GX MK2 Monitoring - BPP900451100:

It offers two options for connection to a GX device:

To make a selection, first decide whether you need a single-phase or a three-phase meter:

The energy meter must be selected according to the installation, the number of phases to be measured and the maximum current per phase. Examples: For a three-phase grid connection, use a three-phase meter. For a three-phase PV inverter, also use a three-phase meter. For a single-phase grid connection, use a single-phase meter. And in an installation with
a single phase grid connection, which also has a PV inverter that needs metering with a meter, you can use two ET112 or the ET340. If the application exceeds the maximum rated current, use a meter with current transformers. Note that almost all PV inverters have "direct reading" by the Victron system, so a meter is not necessary to measure your production.

Datasheet Victron ET340 Energy Meter - 3 Phase - 65A - REL300300000

View Victron ET340 Energy Meter Guide - 3 phase - 65A - REL300300000

Are you looking for a Wi-Fi solution for measuring or switching loads? In the Shelly + Victron guide We compare the Shelly meters compatible with Venus OS (Pro 3EM, EM Gen3, etc.) and explain when this RS485-enabled meter is the best choice and when a Shelly meter is preferable.