Pro 12V 690W 5.12 kWh Solar Kit for CCTV Cameras

From 2.380,18€

TAXES INC.

Kit solar para 6-8 cámaras IP + grabador NVR + router 4G (hasta ~50 W continuos, 24 h). 2 placas Victron 345 W, regulador SmartSolar MPPT 100/50, 2 baterías SuperPack 12,8 V 200 Ah (5,12 kWh) y Smart BatteryProtect. Autonomía aproximada de 4 días sin sol.

Disponible para la venta · Plazo de entrega según stock de la referencia
Product
Finance your purchase with Cetelem
Reference: KIT-VIG-44149 Categories: ,

Details of the Pro 12V 690W 5.12 kWh Solar Kit for CCTV Cameras

Pro 12V 690W 5.12 kWh Solar Kit for CCTV Cameras

Kit solar de videovigilancia para instalaciones grandes sin red eléctrica: varias cámaras IP, grabador NVR y router 4G funcionando las 24 horas en obras, naves, explotaciones agrícolas, plantas solares, desguaces o urbanizaciones sin suministro.

Features

  • Consumo continuo recomendado: hasta 50 W (unos 1,2 kWh al día)
  • 2 baterías de litio LiFePO4 con 5,12 kWh en total: unos 4 días de autonomía sin sol
  • Producción en invierno: unos 1,4 kWh/día en el sureste peninsular
  • Smart BatteryProtect para proteger las baterías de descargas profundas
  • Salida de 12 V DC para cámaras, NVR, switch PoE y router
  • Monitorización por Bluetooth con VictronConnect, ampliable a portal VRM con un dispositivo GX

Ejemplo: 6 cámaras IP de 4,5 W + grabador NVR de 12 W + router 4G de 5 W + switch PoE de 6 W = 50 W × 24 h = 1,2 kWh/día.

What’s included in the kit

  • 2× Placa solar Victron 345 W 24 V monocristalina (conexión en paralelo)
  • 1× Regulador Victron SmartSolar MPPT 100/50
  • 2× Batería Victron SuperPack LiFePO4 12,8 V 200 Ah (en paralelo)
  • 1× Victron Smart BatteryProtect 12/24 V 65 A
  • 1× Barra colectora Busbar Victron
  • 2× Portafusibles MIDI con fusibles de 60 A y 80 A
  • 1× Desconectador de batería ON/OFF
  • 2× Par de conectores MC4
  • 30 m de cable solar de 4 mm² (15 m rojo y 15 m negro)

Qué no incluye

Cámaras, grabador, router 4G, switch PoE, caja estanca para batería y regulador, estructura de la placa y poste. Pídenoslo si quieres el conjunto completo.

Compara los tres tamaños en la categoría solar kits for CCTV cameras o lee nuestra guía how to install CCTV cameras where there is no electricity supply.

Frequently asked questions

Does it work with any brand of camera?

Yes. The kit supplies 12 V DC, the voltage at which most IP and analogue cameras, 4G routers and many recorders operate. If your cameras are PoE-enabled, add a PoE switch with a 12 V input or a step-up PoE injector. Avoid powering the cameras via a 230 V inverter and its transformers: this results in a loss of between 15 and 25 % of power and reduces battery life.

How many cameras can I connect?

Up to around 50 W of continuous power consumption: for example, 6 to 8 IP cameras, an NVR with a hard drive, a PoE switch and a 4G router. If you are using motorised PTZ cameras or spotlights, please calculate their power consumption separately or contact us.

Does it work in winter and on cloudy days?

Yes. The kit is designed to cope with December’s sunlight levels in the south-east of the peninsula, and the battery provides around four days’ runtime without sunlight. In the northern half of Spain or in areas with a lot of fog, choose the larger kit or add an extra panel.

How can I view the cameras on my mobile if there’s no internet connection?

With a 4G router with a data SIM card connected to the kit. The router is not included: you can use your own or order one from us along with the kit. It consumes between 3 and 6 W, which is already factored into the recommended power consumption.

What happens if the battery runs flat?

The Smart BatteryProtect cuts off the power supply before the batteries become over-discharged and reconnects it when the panels recharge them. Each SuperPack battery also has its own BMS.

Can I expand it at a later date?

Yes. The MPPT 100/50 can handle up to around 700 W of panels at 12 V; if you need more, you can add a second controller. The SuperPack batteries support connecting more units in parallel.

Do you need any permits or a certificate?

It requires no connection to the mains or paperwork with the electricity supplier: it is a stand-alone, very low-voltage (12 V) system. It is mounted on a post, wall or roof using a mounting frame for the panel and a waterproof box for the battery and the controller.

Does it include installation?

El kit se vende como material. Si estás en la Región de Murcia o alrededores, nuestra instaladora ICIDE puede instalarlo. Para el resto de España te ayudamos por teléfono o correo antes y después de la compra.

Weight and dimensions

Weight 86,49 kg
Dimensions 187,3 × 89 × 26 cm

User feedback

Reviews

There are no reviews yet.

Be the first to review “Kit solar para cámaras de vigilancia Pro 12V 690W 5,12 kWh”

Your email address will not be published. Required fields are marked *

Delivery deadlines

At FVComponentes.com we have stock of the references with the highest turnover, however our catalogue is so wide and economical because we work with many of the references on request. This means that the usual delivery time of 2-4 working days can be extended to 1-2 weeks + subsequent shipment by us. Thanks to this, we can offer very competitive and attractive prices to our customers that are difficult to match. If you wish, you can write to us via the chat on the website, call us at 968 97 83 01 or write to us at comercial@fvcomponentes.com to check if we have stock or the delivery time of the component you wish to purchase before finalising your order.