Inverter Charger 24V Victron Multiplus II GX 24/3000 70A-32A

Features of the Inverter Charger 24V Victron Multiplus II GX 24/3000 70-32 - PMP242306000

This inverter is an advanced device for our photovoltaic installation that allows us to have a hybrid self-consumption system with accumulation and with full operational guarantees. It has a multifunctional charger with a number of functions electrical certifications from a large number of countries that enable it to be used as a grid-connected energy storage system (ESS); It also incorporates anti-islanding protection and the Victron PowerControl and PowerAssist functionalities.

The Victron Multiplus II GX 24/3000 70-32 - PMP242306000 24V inverter charger is a guarantee of reliability and stability, thanks to the advanced design of its power stage.

It offers up to 3000VA of output power from the inverter itself, although thanks to its PowerAssist function, it can supply more output power by adding energy from the AC input and also from the batteries so as not to overload the external grid input.

It works with 24V batteries and has an internal 70A battery charger.

Thanks to its function as a UPS, it is able to offer uninterruptible power output, as the switching is very fast so that critical consumption is not affected. It is highly expandable thanks to its ability to work in parallel with up to 6 units. It is also possible to use it on a three-phase network by installing one unit per phase, to which we can also add parallel operation within the phases themselves.

GX Device

The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display. This integrated device includes:

• A BMS-Can interface that can be used to connect to a battery managed by a compatible CAN-bus.
• One USB port.
• One Ethernet port.
• One VE.Direct port

Inverter charger operation 24V Victron Multiplus II GX 24/3000 70-32 - PMP242306000

The MultiPlus II GX inverter can be operated in all common energy storage topologies. A current sensor is available as an option to limit the AC input according to your needs, as the transfer and load power of the MultiPlus II can be too high for the available current.

MultiPlus II used as UPS in critical load applications

In this case the inverter charger can have the usual loads, powered by the conventional grid and have an energy storage system (battery) that will power the critical loads if the grid fails or is unstable.

Consideration shall be given to whether any limitation of the AC input to a safe value is to be applied by means of the PowerControl and PowerAssist functions.

Grid-connected and with photovoltaics via MPPT controller

In this case the 24V inverter charger Victron Multiplus II GX 24/3000 70-32 - PMP242306000 will use the information provided by the toroidal current sensor and thus optimise self-consumption by converting the energy into alternating current and using it directly for consumption. This allows us to choose whether or not to feed surplus solar energy into the electricity grid.

The batteries are recharged by the solar panels and consumption can be divided between critical consumption, which is always powered even in the event of a power cut, and normal consumption, which can also be powered by the energy produced by the panels.

Inverter Charger 24V Victron Multiplus II GX 24/3000 70-32 Inverter Charger Monitoring - PMP242306000

It is highly recommended, in order to have maximum control of the solar installation, to include the Victron ColorControl Panel; since from it we can configure, load the operating parameters and supervise the performance of the entire system. We will have detailed information on production, consumption, storage, etc.

Thanks to the inclusion of the Victron ColorControl Panel, we will have access to the VRM portal provided by the brand where we will have access to the monitoring and configuration of the system from any terminal with internet access. The VRM portal will even give us the option of sending us alarms depending on what we program in the operation of the system.

Inverter charger 24V Victron Multiplus II GX 24/3000 70-32 - PMP242306000 Compatibility

The MultiPlus II can work with virtually any 24V battery on the market without any problem. Its great flexibility and adaptability allows it to be configured to charge a lead-acid battery of any technology, whether sealed or open OPzS type.

Victron regularly updates its software to ensure compatibility with the vast majority of brands of lithium batteries on the market. This is a guarantee for the future.

If an external charge regulator topology is used to charge batteries or for direct self-consumption, it is advisable to use an MPPT model of the Victron brand. In this way, the ColorControl panel will show the photovoltaic production of the system in detail.

If a photovoltaic inverter is used as a solar generator, it is advisable to use a product from FroniusThe ColorControl and the VRM portal are also compatible with other well-known brands in the sector, such as Kostal. In the ColorControl and the VRM portal we can also monitor the production of the PV inverter without any problem.

There is also compatibility with other manufacturers such as Schneider; the compatibility table can be consulted on the Victron website, where it is updated regularly.

Datasheet Inverter Charger 24V Victron Multiplus II GX 24/3000 70-32 - PMP242306000

View Victron Multiplus II GX 24/3000 70-32 - PMP242306000 24V inverter charger data sheet