Victron Orion-Tr Smart 48/24 16A isolated booster converter

Victron Orion-Tr Smart 48/24 16A isolated booster converter - ORI482438120

The Victron Orion-Tr Smart Booster Converter 48/24 16A isolated - ORI482438120 is a device that functions as a stable power supply or battery charger with a three-stage charging algorithm. Its design makes it ideal for vehicles with smart alternators and lithium battery systems; it ensures efficient charging and protects the alternator against overcharging.

Orion 48/24 16A insulated features

• Supports smart alternators (for Euro 5 and Euro 6 vehicles): Detects engine shutdown without the need for additional sensors.
• Battery separation: Ensures charging of the auxiliary battery without affecting the starter battery.
• It has extensive electronic protection: Includes overload, short-circuit and overheating protection.
• Three-stage charging: Initial charge, absorption and float modes to extend battery life.
• Bluetooth configuration: Allows configuration and monitoring via the VictronConnect application.

Orion-Tr Smart 48/24 16A insulated specifications

• Input voltage range: 32-70 V
• Disconnection undervoltage: 28 V
• Undervoltage reset: 30 V
• Rated output voltage: 24.2 V
• Output voltage adjustment range: 18-30 V
• Output voltage tolerance: +/- 0,2 V
• Noise level: 2 mV rms
• Cont. output current at nominal output voltage and 40ºC: 16 A
• Maximum output current (10 s) at rated output voltage minus 20 %: 25 A
• Short-circuit current: 40 A
• Power cont. output at 25 °C: 430 W
• Power cont. output at 40 °C: 380 W
• Efficiency: 89%
• No load input load current: < 80mA
• Current at rest: < 1 mA
• Use as a power supply: Yes, output voltage can be configured via Bluetooth
• Galvanic isolation: 200 V between input, output and housing
• Working temperature range: -20 to +55 °C (power reduction of 3 % for each °C above 40 °C)
• Humidity: Max. 95 % non-condensing
• DC connection: Screw terminals
• Maximum cable cross-section: 16 mm² (AWG6)
• Weight: 1.6 kg
• Dimensions: 130 x 186 x 70 mm
• Degree of protection:
  • Electronic components: IP43
  • Connection area: IP22

Installation and Configuration

Assembly

• Install on a non-flammable surface.
• Install vertically and with sufficient space around the equipment for adequate ventilation.
• It must not be placed on top of the battery to avoid damage from charging gases.

Wiring and Fuses

• Use flexible multi-stranded copper cables.
• Follow the cable section recommendations according to the distance between batteries.
• Install a fuse according to the equipment to protect the installation.

Battery Connection

• Check polarity before connecting. Damage caused by reverse polarity is not covered under warranty.
• Set the operating mode (power supply or charger) in the VictronConnect application.
• Connect the remote on/off input if external control is desired.

Booster 48/24 16A LED Indicators

The device has two LEDs for easy monitoring:

• Green LED (Status):
  • On: Output active or battery charged.
  • Flashing: Charging battery.
  • Off: No input power or remote shutdown.
• Blue LED (Bluetooth):
  • Fast flashing: Connected to Bluetooth.
  • Slow flashing: Waiting for connection.

Troubleshooting

Charger does not switch on

• Check fuses and all wiring connections.
• Check that the input voltage is within the recommended range.
• Ensure that the remote on/off link is activated.

Battery does not charge

• Check the parameter settings in the VictronConnect App.
• Check for input voltage blockage.
• Check that the engine shutdown detection is not disabling the load.

Bluetooth problems

• Ensure that Bluetooth is activated in the settings.
• Restart the device if it does not appear in the application.

Common error codes

• Error 2: Battery voltage too high.
• Error 26: Terminal overheating.
• Error 27: Short-circuit at the output.
• Error 119: Configuration data lost, will require reboot and reconfiguration.

Using the VictronConnect Application

The VictronConnect application allows:

• Configure and monitor the victron booster wirelessly.
• Adjust charging modes and engine shutdown detection.
• View real-time data and battery status.
• Update the firmware of the device.

Operating Modes Victron Orion-Tr Smart 48/24 16A Isolated Converter Victron Orion-Tr Smart 48/24 16A Isolated Converter

• Charger mode: It regulates the battery charge by means of a three-stage algorithm.
• Power Supply Mode: Provides stable voltage output regardless of input fluctuations.
• Automatic mode: Switches between the above modes according to system demand.

Maintenance and Recommendations

• Cleaning: Keep free of dust and dirt to avoid overheating.
• Verification of connections: Periodically check that cables and fuses are in good condition.
• Firmware update: Use VictronConnect to keep the system up to date. This makes the system more efficient.
• Performance test: Monitor performance under load to verify stability.

48/24 16A Booster Safety and Regulations

• Short-circuit protection: The device is designed to prevent damage in the event of a power failure.
• Regulatory compliance: Victron equipment complies with international safety and efficiency standards.
• Recommendations for use: Avoid overcharging and regularly check the condition of the battery.
• Operating temperature: Do not use the device when the temperature is outside the recommended range.

Common Applications

• Recreational vehicles and motorhomes: Ideal for mobile electrical systems.
• Boats: Provides a stable power supply for marine equipment.
• Off-grid solar systems: Allows the integration of auxiliary batteries in off-grid systems.
• Commercial fleets: Useful for trucks and work vehicles with multiple batteries.

Victron Orion-Tr Smart 48/24 16A isolated booster converter - ORI482438120

See the sheet of the Inverter Victron Orion-Tr Smart 48/24 16A isolated - ORI482438120

View the manual for the Victron Orion-Tr Smart 48/24 16A Isolated Victron Converter - ORI482438120