Charger Victron Blue Smart IP67 12V 25A 230VAC

Features of the Victron Blue Smart IP67 12V 25A 230VAC Charger

Bluetooth Smart enabled

The charger Victron Blue Smart IP67 12V 25A 230VAC is the wireless solution for monitoring voltage and current, changing settings and updating the charger when new features become available. Thanks to Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our chargers. IP22 and IP65.

Fully encapsulated: waterproof, shockproof and fireproof

Water, oil and dirt cannot damage the Blue Smart IP67 charger. Its housing is made of cast aluminium and the electronic components are moulded in resin.

The highest efficiency ever!

We're setting a new industry standard: while having an efficiency of 92% or better, these chargers generate three to four times less heat. And once the battery is fully charged, power consumption is reduced to less than one watt - five to ten times less than the industry standard.

5-stage variable loading algorithm: initial loading - absorption - reconditioning - flotation - storage

The Blue Smart charger features microprocessor-controlled "adaptive" battery management. Its "adaptive" function will automatically optimise the charging process based on the usage of the battery.

Storage mode: Less ageing and need for maintenance when the battery is not in use

The storage mode is activated when the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for 12 V batteries) to reduce gassing and corrosion of the positive plates. Once a week, the voltage is brought back up to absorption level to "equalise" the battery. This function prevents electrolyte stratification and sulphation, the main causes of battery failure.

Also charges Li-Ion batteries

Li-ion batteries are charged with a simple initial charge - absorption - float algorithm.

Fully discharged battery recovery function

It will start charging even if the battery has been discharged to zero volts. It will reconnect to a fully discharged lithium-ion battery with the internal disconnect function.

Protection against overheating

It can be used in hot environments, such as an engine room. The output current will reduce as the temperature rises to 60°C, but the charger will not fail.

Two LED status indicators

Yellow LED: initial charge (fast flashing), absorption (slow flashing), floating (steady), storage (off)
Green LED: on.

Datasheet Victron Blue Smart Charger IP67 12V 25A 230VAC - BPC122547006

View Victron Blue Smart IP67 Charger 12V 25A 230VAC - BPC122547006