Accessories

The accessories for photovoltaic structures are the fastening, connection and sealing elements that complete the installation of the panels on the roof or ground. They allow the mounting system to be adapted to the specific conditions of each project: chimney connections, eave ends, transitions between rail sections, reinforcements for high wind loads or structural anchors on roofs without a slope.

FVComponentes.com offers original accessories for the following systems Novotegra y Sunfer, made of stainless steel and anodised aluminium for maximum resistance to corrosion in outdoor installations:

Novotegra screws: M10 double threaded screws in 200mm and 300mm lengths for anchoring to battens or roof structure. M10 knurled nuts for fixing to the rail without additional drilling.
Rails and connectors: C 47 micro-rail with integrated EPDM gasket for watertight sealing at the cover drilling point. Inner and two-level connectors for rail joints and extensions. End caps for clean rail end caps.
Module clamps: End and intermediate clamps for fixing the panels to the rail. The intermediate clamps include an earth contact plate to comply with the equipotentiality requirements of the REBT.
Novotegra lifting triangles: For installation on flat roofs with variable pitch from 15° to 30°. With reinforcement brace for high wind loads.
Celo ResiFIX chemical block: For structural anchoring of the first fixing to concrete or masonry decking. Styrene-free, compatible with the temperature cycles of outdoor installations.

Doubts about which accessories you need to complete your installation? Our technical equipment tells you.