Pro 12V 690W 5.12 kWh Solar Kit for CCTV Cameras

From 2.380,18€

TAXES INC.

Solar kit for 6–8 IP cameras + NVR recorder + 4G router (up to ~50 W continuous, 24 hours). 2 x Victron 345 W solar panels, 1 x SmartSolar MPPT 100/50 controller, 2 x SuperPack 12.8 V 200 Ah batteries (5.12 kWh) and Smart BatteryProtect. Approximate runtime of 4 days without sunlight.

Disponible para la venta · Plazo de entrega según stock de la referencia
Product
Finance your purchase with Cetelem
Reference: KIT-VIG-44149 Categories: ,

Details of the Pro 12V 690W 5.12 kWh Solar Kit for CCTV Cameras

Pro 12V 690W 5.12 kWh Solar Kit for CCTV Cameras

Solar-powered CCTV kit for large installations without access to the mains electricity supply: Several IP cameras, an NVR recorder and a 4G router operating 24 hours a day at building sites, industrial units, farms, solar power stations, car breakers or housing developments without a mains supply.

Features

  • Recommended continuous intake: up to 50 W (around 1.2 kWh a day)
  • 2 LiFePO4 lithium batteries with 5,12 kWh in total: about 4 days’ battery life without sunshine
  • Winter production: around 1.4 kWh/day in the south-east of the Iberian Peninsula
  • Smart BatteryProtect to protect batteries from deep discharge
  • 12 V DC output for cameras, NVRs, PoE switches and routers
  • Bluetooth monitoring with VictronConnect, expandable to a VRM portal using a GX device

Example: 6 IP cameras (4.5 W each) + NVR recorder (12 W) + 4G router (5 W) + PoE switch (6 W) = 50 W × 24 hours = 1.2 kWh/day.

What’s included in the kit

  • 2× Victron 345 W 24 V monocrystalline solar panel (connected in parallel)
  • 1× Victron SmartSolar MPPT 100/50 regulator
  • 2× Victron SuperPack LiFePO4 12.8 V 200 Ah batteries (in parallel)
  • 1× Victron Smart BatteryProtect 12/24 V 65 A
  • 1× Busbar Victron
  • 2× MIDI fuse holders with 60 A and 80 A fuses
  • 1× ON/OFF battery switch
  • 2× pairs of MC4 connectors
  • 30 m of 4 mm² solar cable (15 m red and 15 m black)

What is not included

Cameras, recorder, 4G router, PoE switch, waterproof case for the battery and regulator, mounting plate and pole. Please ask us if you’d like the complete set.

Compare the three sizes in this category solar kits for CCTV cameras or read our guide how to install CCTV cameras where there is no electricity supply.

Frequently asked questions

Does it work with any brand of camera?

Yes. The kit supplies 12 V DC, the voltage at which most IP and analogue cameras, 4G routers and many recorders operate. If your cameras are PoE-enabled, add a PoE switch with a 12 V input or a step-up PoE injector. Avoid powering the cameras via a 230 V inverter and its transformers: this results in a loss of between 15 and 25 % of power and reduces battery life.

How many cameras can I connect?

Up to around 50 W of continuous power consumption: for example, 6 to 8 IP cameras, an NVR with a hard drive, a PoE switch and a 4G router. If you are using motorised PTZ cameras or spotlights, please calculate their power consumption separately or contact us.

Does it work in winter and on cloudy days?

Yes. The kit is designed to cope with December’s sunlight levels in the south-east of the peninsula, and the battery provides around four days’ runtime without sunlight. In the northern half of Spain or in areas with a lot of fog, choose the larger kit or add an extra panel.

How can I view the cameras on my mobile if there’s no internet connection?

With a 4G router with a data SIM card connected to the kit. The router is not included: you can use your own or order one from us along with the kit. It consumes between 3 and 6 W, which is already factored into the recommended power consumption.

What happens if the battery runs flat?

The Smart BatteryProtect cuts off the power supply before the batteries become over-discharged and reconnects it when the panels recharge them. Each SuperPack battery also has its own BMS.

Can I expand it at a later date?

Yes. The MPPT 100/50 can handle up to around 700 W of panels at 12 V; if you need more, you can add a second controller. The SuperPack batteries support connecting more units in parallel.

Do you need any permits or a certificate?

It requires no connection to the mains or paperwork with the electricity supplier: it is a stand-alone, very low-voltage (12 V) system. It is mounted on a post, wall or roof using a mounting frame for the panel and a waterproof box for the battery and the controller.

Does it include installation?

The kit is sold as a kit. If you are in the Region of Murcia or the surrounding area, our installation partner, ICIDE, can install it for you. For the rest of Spain, we’ll assist you by telephone or email before and after your purchase.

Weight and dimensions

Weight 86,49 kg
Dimensions 187.3 × 89 × 26 cm

User feedback

Reviews

There are no reviews yet.

Be the first to review “Kit solar para cámaras de vigilancia Pro 12V 690W 5,12 kWh”

Your email address will not be published. Required fields are marked *

Delivery deadlines

At FVComponentes.com we have stock of the references with the highest turnover, however our catalogue is so wide and economical because we work with many of the references on request. This means that the usual delivery time of 2-4 working days can be extended to 1-2 weeks + subsequent shipment by us. Thanks to this, we can offer very competitive and attractive prices to our customers that are difficult to match. If you wish, you can write to us via the chat on the website, call us at 968 97 83 01 or write to us at comercial@fvcomponentes.com to check if we have stock or the delivery time of the component you wish to purchase before finalising your order.