Victron Orion-Tr Smart 48/12 30A isolated converter - ORI481238120

New release. Available in March.

Features of the Victron Orion-Tr Smart 48/12 30A Isolated Converter - ORI481238120

Bluetooth Smart Connection

• Take control from your mobile device: With the VictronConnect app, you can configure, monitor and update the equipment from any smartphone, without there being a physical connection to the equipment.
• Access to real-time information: system data can be reviewed, notifications and alarms can be received wirelessly.

Orion-Tr Smart 48/12 30A isolated: Flexible and Adaptable Configuration

• Programmable algorithm: The Orion-Tr Smart Booster allows you to adjust the charging algorithm or set a fixed output voltage, adapting to different system requirements.
• Compatibility with intelligent alternators (Euro 5 and Euro 6 vehicles): Automatically detects whether the engine is running, optimising operation according to operating conditions.

3-Stage Loading Algorithm

• Lead-acid batteries: Adjust the absorption time according to the depth of discharge: shallow charges require less time, while deep discharges require longer absorption time to ensure a full charge.
• Lithium batteries: Maintains a fixed absorption time of 2 hours, thus ensuring consistent performance.

Advanced Electronic Protection of the Orion 48/12 30A insulated

• Comprehensive protection: Provides safety against overheating, overload and short circuits.
• Thermal management: Automatically reduces power in high temperature conditions to prevent damage.

Remote On/Off Control

• Allows a remote switch to be connected via two-phase connectors.
• It can also be configured manually using the terminals, connected to the positive or negative of the battery.

Robust and Safe Construction

• IP43 certification: Provides protection against splashes and dust when installed with the terminals facing downwards.
• Battery management: Ensures automatic separation between the main and auxiliary batteries when the engine is not running, avoiding unnecessary discharges.

Orion-Tr Smart 48/12 30A Isolated Converter Specifications

• Input voltage range: 32-70 V
• Disconnection undervoltage: 28 V
• Undervoltage reset: 30 V
• Rated output voltage: 12.2 V
• Output voltage adjustment range: 10-15 V
• Output voltage tolerance: +/- 0,2 V
• Noise level: 2 mV rms
• Cont. output current at nominal output voltage and 40ºC: 30 A
• Maximum output current (10 s) at rated output voltage minus 20 %: 40 A
• Short-circuit current: 60 A
• Power cont. output at 25 °C: 430 W
• Power cont. output at 40 °C: 360 W
• Efficiency: 87%
• No load input load current: < 80mA
• Current at rest: < 1 mA
• Use as a power supply: Yes, output voltage can be configured via Bluetooth
• Galvanic isolation: 200 V between input, output and housing
• Working temperature range: -20 to +55 °C (power reduction of 3 % for each °C above 40 °C)
• Humidity: Max. 95 % non-condensing
• DC connection: Screw terminals
• Maximum cable cross-section: 16 mm² (AWG6)
• Weight: 1.8 kg
• Dimensions: 130 x 186 x 80 mm
• Degree of protection:
  • Electronic components: IP43
  • Connection area: IP22

Orion-Tr Smart 48/12 30A insulated installation

Booster assembly

For safe and efficient installation, it is recommended:

• Mount the converter vertically on a non-flammable surface.
• Respect a distance of 10 cm above and below the device to ensure adequate ventilation.
• Place it close to the battery, but not directly on top of it.

Connection and Wiring

• Use flexible, multi-stranded copper cables, which are recommended by the manufacturer.
• Check the polarity before connecting the battery, as a reverse connection may damage the equipment and is not covered by the warranty.
• Ensure that the cables are correctly fixed so that there are no false contacts and overheating.

Operating Modes

The Victron Orion-Tr Smart has two main modes:

• Power Supply Mode: Maintains a stable output regardless of input variations.
• Charger Mode: Implements a three-stage charging process (bulk, absorption and float), thus optimising battery performance.

Remote On/Off Control

The converter can be remotely switched on or off by means of:

• An external switch between pins L and H.
• Connection to a battery management system (BMS).

Engine Shutdown Detection

The Orion-Tr Smart includes an engine shutdown detection system so that the service battery is not discharged when the engine is off. Its operation is based on:

• Alternator voltage monitoring: Detects whether the engine is running by measuring voltage fluctuation.
• Configured timeout: The start of charging can be delayed after starting the engine.
• Switch-off hysteresis: Avoids constant switching on and off when the voltage fluctuates.

Troubleshooting

Some common problems that may arise include:

1. Charger Does Not Switch On

• Check fuses and battery connections.
• The input voltage must be within the recommended range.
• Verify that the remote On/Off connection works.
• If the device has been connected with the polarity reversed, it may have been damaged.

2. Battery Does Not Charge

• Check that the Charger mode is activated in VictronConnect.
• Verify absorption and float voltage settings.
• Check that the load is not being blocked:
  • By detection of engine shutdown.
  • The BMS may be blocking it.

3. Problems with Bluetooth Connection

• Make sure that Bluetooth is activated on the converter.
• If the blue LED flashes every 0.8 seconds, another device has already been paired.
• Reset the converter by disconnecting it from the battery for a few seconds.

Datasheet and manual for the Victron Orion-Tr Smart 48/12 30A Isolated Converter - ORI481238120

See the technical datasheet for the Victron Orion-Tr Smart 48/12 30A isolated converter - ORI481238120

View the manual for the Victron Orion-Tr Smart 48/12 30A Isolated Converter - ORI481238120