Inverter 24V Victron Phoenix 24V 5000VA Smart - PIN242501000

Features of the Victron Phoenix 24V Inverter 24V 5000VA Smart - PIN242501000

Control from a smartphone or tablet
Thanks to the integrated Bluetooth in the Victron Phoenix 24V 5000VA Smart 24V inverter, you can easily configure and monitor the inverter from your mobile device.

Highlights of functions

• Low voltage alarm to protect the battery.
• Low voltage shutdown and restart, can be adjusted according to the load.
• Output voltage: 210 - 245 V
• Frequency: 50/60 Hz.
• Intelligent ECO mode, which optimises consumption by reducing the load.
• Alarm relay for more accurate monitoring.
• Real-time monitoring: entry, exit, loading and alarms.

Connectivity and advanced control

• VE.Direct port: connects the inverter to a computer for configuration and monitoring (requires a VE.Direct interface cable).
• This victron 5000w 24v inverter incorporates a remote On/Off switch, compatible with relays or direct connections to the battery.

Reliability and high performance

• This victron 24v 5000w inverter has a high starting power, ideal for LED lamps, power tools and more.
• Full protection: it is short-circuit and overheating resistant.
• LED diagnostics for quick identification of status and possible alerts.

Seamless switching

For a smooth transition between power sources, the Filax automatic transfer switch (less than 20 ms response time) or a MultiPlus with built-in switch can be integrated, ensuring that sensitive equipment such as computers continue to operate without outages.

Proven reliability: technology with toroidal transformer and full bridge, guaranteeing years of safe operation.

Victron Phoenix 24V 5000VA Smart Specifications

• Input voltage range: 18.6 - 34 V
• Output Output voltage: 230 VAC ± 2 % 50 Hz or 60 Hz ± 0,1 % (1 )
• Power cont. output at 25 ºC: 5000 VA
• Power cont. output at 25 ºC: 4000 W
• Power cont. output at 40 ºC: 3700 W
• Power cont. output at 65 ºC: 2800 W
• Peak power: 10000 W
• Max. efficiency 95%
• No-load consumption: 18W
• No-load consumption in ECO mode: 2,2W
• Programmable relay
• ECO mode start/stop power: adjustable
• Protection: a-g
• Wireless communication via Bluetooth: For remote monitoring and system integration
• VE.Direct communication port: For remote monitoring and system integration
• Remote on/off: Yes
• Working temperature: -40 to +65ºC (fan cooled)
• Humidity (non-condensing) max: 95%
• Material and colour: steel (blue RAL 5012; and black RAL 9017)
• Protection category: IP 21
• Battery connection: 2+2 M8 bolts
• 230 VAC connection: Screw terminals
• Weight: 29Kg
• Dimensions: 595 x 295 x 160 mm
• Parallel and three-phase connection is not allowed.

Installation of the Victron Inverter 24v 5000w

Inverter location 24v 220v

• Avoid contact with water. Do not expose the inverter to rain or moisture.
• Installation should be in a dry and well-ventilated place.
• The victron 5000w 24v inverter must be placed on a flat surface.
• Install as close as possible to the batteries, but never directly over them.
  • The distance between the product and the battery should be as short as possible to minimise voltage loss in the cables.
• A space of at least 10 cm must be left around the appliance for cooling.
• If the victron 24v 5000w inverter gets too hot, it will shut down. When the inverter reaches a safe temperature level, the unit will automatically restart.
• Do not place the unit in direct sunlight. The ambient temperature should be between -20°C and 40°C (humidity < 95 % non-condensing).

Battery connection

Batteries with sufficient capacity and battery cables of adequate cross-section must be used. There is no safety fuse inside the inverter, so an external safety fuse must be installed.

• Recommended cable cross-section according to length:
  • 0-5 m: 1 x 90 mm² 0-5 m: 1 x 90 mm² 0-5 m: 1 x 90 mm² 0-5 m: 1 x 90 mm
  • 5-10 m: 2 x 95 mm² (2 x 95 mm²)
    • A cable must be sized to carry the rated current of the fuse without overheating.
  • Fuse rating required for the victron 5000w 24v inverter: 400A
  • Battery capacity: 300 - 1500 Ah

Connect the battery cables as follows:

• Please note that a reverse polarity connection (+ to - and - to +) may damage the inverter.
• Connect the battery cables to the + (red) and - (black) poles of the battery.
• Tighten the battery connections securely, a maximum torque of 11 Nm is recommended.

Solar panel connection

• Note that reverse polarity connection of the solar panel cables may damage the inverter.
• Connect the solar panel wires to the positive (red) and negative (black) PV terminals.
• Secure PV connections tightly. A tight connection will reduce the contact resistance as much as possible.

Datasheet and manual 24V Inverter Victron Phoenix 24V 5000VA Smart - PIN242501000

See the Victron Phoenix 24V Inverter 24V 5000VA Smart - PIN242501000 datasheet

View the manual for the Victron Phoenix 24V Inverter 24V 5000VA Smart - PIN242501000