Victron SmartSolar MPPT RS 450/200-MC4 controller

Features of the Victron SmartSolar MPPT RS 450/200-MC4 Controller - SCC145120510

The Victron SmartSolar MPPT RS 450/200-MC4 - SCC145120510 is the solution for systems with large series-connected PV arrays charging 45V DC batteries. Perfect for large battery systems in both off-grid and self-consumption solar installations.

Solar charge controller with ultra-fast Maximum Power Point Tracking (MPPT)

• The SmartSolar MPPT RS is a 48 V solar charge controller with a PV input of up to 450 VDC PV and a 100 A or 200 A output.
• It is used in off-grid and grid-connected solar applications where maximum battery charging power is required.

Multiple independent MPPT monitoring inputs

• With various MPPT trackers, you can optimise the design of your solar panels for maximum performance at a specific location.

Isolated PV connections for more safety in the Victron MPPT RS SmartSolar Controller

• Complete galvanic isolation between the battery and PV connections provides additional safety for the entire system.

Wide MPPT voltage range of the Victron SmartSolar MPPT RS 450/200-MC4 MPPT Controller

• Operating range from 80 to 450 VDC PV with a starting voltage of 120 VDC PV.

Lightweight, efficient and quiet

• Thanks to its high-frequency technology and new design, the 100 A model of this powerful charger weighs only 7.9 kg.
• In addition, it has excellent efficiency, low standby power consumption and very quiet operation.

Display and Bluetooth

• The display shows battery and controller parameters.
• These parameters can be accessed with a smartphone or other Bluetooth enabled device.
• In addition, Bluetooth can be used to configure the system and change parameters with VictronConnect.

Monitoring of the PV insulation resistance for peace of mind at higher voltages

• The MPPT RS continuously monitors the PV array and can detect faults that reduce the insulation of the panels to unsafe levels.

VE.Can and VE.Direct port

• Allows you to connect it to the Victron Cerbo GX MK2 Monitoring - BPP900451100 for remote system monitoring, data logging and firmware upgrades.
• VE.Can allows up to 25 units to be connected together in parallel and synchronise their charging processes.

I/O connections

• Programmable relay, temperature sensor, auxiliary, digital input and voltage sensor connections. Remote input can accept Victron smallBMS and other types of BMS with "Load Enable" signal.

Datasheet Victron SmartSolar MPPT RS 450/200-MC4 Regulator - SCC145120510

View Victron SmartSolar MPPT RS 450/200-MC4 Controller data sheet - SCC145120510

Manual Victron SmartSolar MPPT RS 450/200-MC4 Controller Victron SmartSolar MPPT RS 450/200-MC4 - SCC145120510

View Victron SmartSolar MPPT RS 450/200-MC4 Controller manual - SCC145120510