Inverter Victron MultiPlus II 48/8000VA 48V 110-100A - PMP482805000

Features of the Victron MultiPlus II Inverter 48/8000VA 48V 110-100A - PMP482805000

The Victron Multiplus II Inverter 48V 8000VA 110-100A is an advanced device for our photovoltaic installation that allows us to have a hybrid system of self-consumption with accumulation and with full guarantees of operation. Like the entire Victron MultiPlus range, this MultiPlus II family is an inverter with a multifunctional charger that has numerous electrical certifications from a large number of countries that enable it to be used as a grid-connected energy storage system (ESS).. The MultiPlus II model, formerly called MultiGrid II, also incorporates anti-islanding protection and Victron PowerControl and PowerAssist functionality.

The Victron Multiplus II 48V 8000VA 100-100A solar inverter charger is a guarantee of reliability and stability, thanks to the advanced design of its power stage.

The Victron Multiplus II Inverter 48V 8000VA 100-100A offers up to 8000VA of output power from the inverter itself, although thanks to its PowerAssist function, it can supply more output power by adding energy from the AC input and also from the batteries so as not to overload the external grid input. It works with 48V batteries and has an internal 110A battery charger.

Thanks to its function as a UPS, it is able to offer uninterruptible power output, as the switching is very fast so that critical consumptions are not affected. Like the rest of the MultiPlus family, it is highly expandable thanks to its ability to work in parallel with up to 6 units. It is also possible to use it on a three-phase network by installing one unit for each phase, to which we can also add parallel operation within the phases themselves.

Operation of the Victron MultiPlus II 48/8000VA 48V 110-100A Inverter - PMP482805000

The MultiPlus II inverter can operate under any common energy storage topology. A current sensor is available as an option to limit the AC input according to our needs, since the transfer and load power of the MultiPlus II may be excessive for the available current. The most common application for this type of inverter is as follows:

MultiPlus II used as UPS in critical load applications. In this case the inverter charger can have the usual loads, powered by the conventional grid and have an energy storage system (battery) that will power the critical loads if the grid fails or is unstable. Consideration will be given to whether any limitation of the AC input to a safe value should be applied using the PowerControl and PowerAssist functions.

Connected to the electrical grid and with photovoltaic by means of MPPT regulator. In this case, the PV inverter will use the information provided by the toroidal current sensor to optimize self-consumption by converting the energy into alternating current and using it directly for consumption. This allows us to choose whether or not to feed the surplus solar production into the grid. The batteries are recharged by the solar panels and consumption can be divided between critical consumption, which is always supplied even in the event of a power cut, and normal consumption, which can also be supplied with the energy produced by the panels.

Inverter Monitoring Victron MultiPlus II Inverter 48/8000VA 48V 110-100A - PMP482805000

It is highly recommended to have maximum control of the operation of the solar installation, include the Victron ColorControl Panel, since from it we can configure, load the operating parameters and monitor the performance of the entire system. All the components will appear in the supervision screen and we will have detailed information of production, consumption, storage, etc.

Thanks to including the Victron ColorControl Panel, we will have access to the VRM portal provided by the brand where we will have access to the monitoring and configuration of the system from any terminal with internet access. The VRM portal will even give us the option to send us alarms depending on what we program in the operation of the system.

Victron MultiPlus II Inverter Compatibility 48/8000VA 48V 110-100A - PMP482805000

The MultiPlus II can work with virtually any 48V battery on the market without any problem. Its great flexibility and adaptability allows it to be configured to charge a lead acid battery of any technology, whether sealed or open OPzS type. Victron periodically updates its software to ensure compatibility with the vast majority of brands of lithium batteries on the market. It is a guarantee for the future.

If an external charge controller topology is used to charge batteries or for direct self-consumption, it is advisable to use an MPPT model of Victron's own brand. In this way in the ColorControl panel we will have in detail the photovoltaic production of the system. If a photovoltaic inverter is used as solar generator, it is advisable to use a product from FroniusThe ColorControl and the VRM portal are also compatible with other well-known brands in the industry, such as Kostal. In the ColorControl and VRM portal we can also monitor the production of the PV inverter without any problem. There is also compatibility with other manufacturers such as Schneider; you can consult the compatibility table on the Victron website, where it is updated regularly.

Datasheet Victron MultiPlus II Inverter 48/8000VA 48V 110-100A - PMP482805000

See Victron MultiPlus II 48/8000VA 48V 110-100A - PMP482805000 Inverter Charger Technical Datasheet