BlueSolar Victron PWM-LCD and USB 12/24V - 30A controller

Features of the BlueSolar Victron PWM-LCD and USB 12/24V - 30A controller:

Liquid crystal display

For monitoring and configuration

Load output

The battery can be prevented from over-discharging by connecting all loads to the charging output. This output will disconnect the load when the battery has discharged to a preset voltage. Some loads (especially inverters) are best connected directly to the battery, and the inverter remote control to the load output. A special interface cable may be required; please refer to the manual. The connection and disconnection voltages are adjustable.

Day/night programming of the load output

This option allows you to pre-set the ON-time after twilight.

Programmable battery charging algorithm

Pre-programmed algorithms for AGM, GEL, flooded or LiFePO4 batteries (only with internal BMS)

Two 5-volt USB outputs

Maximum current (both outputs together): 2A

Datasheet BlueSolar Victron PWM-LCD and USB Controller 12/24V - 30A - SCC010030050

Datasheet BlueSolar Victron PWM-LCD&USB 12/24V-30A - SCC010030050