Phoenix Inverter 24/375 VE Direct NEMA GFCI (UL 458) 120V - PIN243750510

110V-120V equipment on request, special sales conditions on request.

Features of the Phoenix Inverter 24/375 VE Direct NEMA GFCI (UL 458) 120V - PIN243750510

The Victron VE.Direct communications port allows the PV inverter to be connected to the

• A computer (a VE.Direct to USB interface cable is required).
• Apple and Android smartphones, tablets, mackbooks and other devices (a VE.Direct to Bluetooth Smart dongle is required).

The Phoenix Inverter 24/375 VE Direct NEMA GFCI (UL 458) 120V - PIN243750510 is fully configurable:

• Low battery voltage alarm and reconnection levels.
• Low battery voltage shutdown and restart levels.
• Dynamic disconnection: load-dependent disconnection level
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode level sensor

ECO mode operation

The Phoenix Inverter 24/375 VE Direct NEMA GFCI (UL 458) 120V - PIN243750510 will remain in stand-by when the wattage of its output drops below a pre-set value. Once in stand-by, the inverter will activate briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.

High additional peak starting power

One of the characteristics of SinusMax technology is its very high starting power. Phoenix inverters are designed to supply difficult loads, such as motors or power tools with high peak starting power.

Phoenix Inverter Remote On/Off Switch 24/375 VE Direct NEMA GFCI (UL 458) 120V - PIN243750510

On this model of solar inverter, you can connect a remote On/Off switch and run the two wires to the inverter to remotely turn the inverter on and off. This option is one of the most valued by customers with a caravan or a boat or sailboat.

Data sheet Phoenix Inverter 24/375 VE Direct NEMA GFCI (UL 458) 120V - PIN243750510

View Phoenix Inverter 24/375 VE Direct NEMA GFCI (UL 458) 120V - PIN243750510 datasheet