Phoenix Inverter 24/1200 VE Direct NEMA GFCI (UL 458) 120V - PIN242122510

110V-120V equipment on request, special sales conditions on request.

Features Inverter Phoenix Inverter 24/1200 VE Direct NEMA GFCI (UL 458) 120V - PIN242122510

The Victron VE.Direct communications port allows the PV inverter to be connected to the

• A computer (a VE.Direct to USB interface cable is required).
• Apple and Android smartphones, tablets, mackbooks and other devices (a VE.Direct to Bluetooth Smart dongle is required).

The Phoenix Inverter 24/1200 VE Direct NEMA GFCI (UL 458) 120V - PIN242122510 is fully configurable:

• Low battery voltage alarm and reconnection levels.
• Low battery voltage shutdown and restart levels.
• Dynamic disconnection: load-dependent disconnection level
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode level sensor

ECO mode operation

The Phoenix Inverter 24/1200 VE Direct NEMA GFCI (UL 458) 120V - PIN242122510 will remain in stand-by when the wattage of its output drops below a pre-set value. Once in stand-by, the inverter will activate briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.

Phoenix Inverter 24/1200 VE Direct NEMA GFCI (UL 458) 120V high peak starting power - PIN242122510

One of the characteristics of SinusMax technology is its very high starting power. These inverters are suitable for powering difficult loads such as motors or power tools with a high starting peak.

Remote on/off switch

In the Phoenix 24/1200 VE Direct NEMA GFCI (UL 458) 120V inverter - PIN242122510, you can connect a remote On/Off switch and run the two wires to the inverter to remotely turn the inverter on and off. This option is one of the most valued by customers with a motorhome or a boat or sailboat.

Datasheet Phoenix Inverter 24/1200 VE Direct NEMA GFCI (UL 458) 120V - PIN242122510

View Phoenix Inverter 24/1200 VE Direct NEMA GFCI (UL 458) 120V - PIN242122510 datasheet