Inverter Victron Phoenix 12/250 VE.Direct NEMA 5-15R 120V - PIN122510500

110V-120V equipment on request, special sales conditions on request.

VE.Direct communication port as standard

The Victron VE.Direct communications port allows the Victron Phoenix Inverter 12/250 VE.Direct NEMA 5-15R 120V - PIN122510500 to be connected to the Victron Phoenix Inverter 12/250 VE.Direct NEMA 5-15R 120V - PIN122510500:

• A computer (a VE.Direct to USB interface cable is required).
• Apple and Android smartphones, tablets, MacBook and other devices (a VE.Direct to Bluetooth Smart dongle is required).

The Victron Phoenix Inverter 12/250 VE.Direct NEMA 5-15R 120V - PIN122510500 is fully configurable:

• Low battery voltage alarm and reconnection levels.
• Low battery voltage shutdown and restart levels.
• Dynamic disconnection: load-dependent disconnection level.
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode level sensor.

ECO mode operation

The Victron Phoenix Inverter 12/250 VE.Direct NEMA 5-15R 120V - PIN122510500 will stand-by when the wattage of its output drops below a pre-set value. Once in stand-by, the inverter will activate briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.

High additional peak starting power

One of the characteristics of SinusMax technology is its very high starting power. Phoenix inverters are designed to supply difficult loads, such as motors or power tools with high peak starting power.

Remote on/off switch

On this model of solar inverter, you can connect a remote On/Off switch and run the two wires to the inverter to remotely turn the inverter on and off. This option is one of the most valued by customers with a caravan or a boat or sailboat.

Datasheet Victron Phoenix Inverter 12/250 VE.Direct NEMA 5-15R 120V - PIN122510500

View Victron Phoenix Inverter 12/250 VE.Direct NEMA 5-15R 120V - PIN122510500 datasheet