Charger Victron Centaur 24/60 (3) - CCH024060000

Victron Centaur 24/60 (3) Charger - CCH024060000: Quality without Compromises

The housing of the Victron Centaur 24/60 (3) Charger - CCH024060000 is an epoxy powder coated aluminum enclosure with drip shield and stainless steel fasteners that withstand the harsh conditions of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if necessary, by automatically reducing output current in extreme environmental conditions.

Universal AC Input Voltage Range 90-265 V and Suitable for DC Supply (AC-DC and DC-DC Operation)

All models will operate without adjustment over an input voltage range of 90 to 265 volts at either 50 Hz or 60 Hz. The chargers will also accept a DC supply of 90-400V.

Three Outputs, Each Capable of Supplying Full Output Current

Three isolated outputs to simultaneously charge 3 battery banks. Each output is capable of supplying the full rated current.

Three-Stage Charging, with Temperature Compensation

The Centaur bulk charges until the output has been reduced to 70% of rated amps, at which time a 4-hour timer begins. After the timed period, the charger switches to float speed. An internal temperature sensor is used to compensate the charge voltage by -2 mV/°C (-1 mV/°F) per cell. A DIP switch is available to select the optimum charge/float voltages for flooded lead acid, gel or AGM batteries.

For more information on batteries and battery charging (including advantages and disadvantages of multi-bank charging and smart charging), see the book "Electricity on Board" (available free of charge from Victron Energy and downloadable from www.victronenergy.com).

Datasheet Victron Centaur 24/60 (3) Charger - CCH024060000

View Victron Centaur 24/60 (3) - CCH024060000 data sheet