Charger Victron Blue Smart IP67 12V 25A 230VAC - BPC122547006

168,87 VAT inc.

TAXES INC.

Input voltage range and frequency: 180-265 VAC 45-65 Hz
Efficiency: 95%
No-load consumption: 0,5W
Current charging, normal mode: 25A
Load current, LOW: 10A
Weight: 2.4kg
Dimensions: 99 x 219 x 65mm

Product available for sale
Finance your purchase with Cetelem
Reference: BPC122547006 Categories: , Tags: , , ,

Product information

Victron Blue Smart IP67 12V 25A 230VAC Charger Features

Bluetooth Smart enabled

The charger Victron Blue Smart IP67 12V 25A 230VAC is the wireless solution to monitor voltage and current, change settings and update the charger when new features appear. Thanks to Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our chargers. IP22 and IP65.

Fully encapsulated: waterproof, shockproof and fireproof

Water, oil and dirt will not damage the Blue Smart IP67 charger. Its housing is made of cast aluminum and the electronic components are molded in resin.

The highest efficiency ever!

We set a new industry standard: while having an efficiency of 92% or better, these chargers generate three to four times less heat. And once the battery is fully charged, power consumption is reduced to less than one watt, five to ten times less than the industry standard.

5-stage variable loading algorithm: initial loading - absorption - reconditioning - flotation - storage

The Blue Smart charger features microprocessor-controlled "adaptive" battery management. Its "adaptive" function will automatically optimize the charging process based on battery usage.

Storage mode: Reduced aging and need for maintenance when the battery is not in use

The storage mode is activated when the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for 12 V batteries) to reduce gassing and corrosion of the positive plates. Once a week, the voltage is brought back up to absorption level to "equalize" the battery. This function prevents electrolyte stratification and sulfation, the main causes of battery failure.

Also charges Li-Ion batteries

Li-ion batteries are charged with a simple initial charge - absorption - float algorithm.

Recovery function for completely discharged batteries

It will start charging even if the battery has been discharged to zero volts. It will reconnect to a fully discharged lithium-ion battery with the internal disconnect function.

Protection against overheating

It can be used in hot environments, such as an engine room. The output current will be reduced as the temperature rises to 60°C, but the charger will not fail.

Two LED status indicators

Yellow LED: initial charge (fast flashing), absorption (slow flashing), floating (steady), storage (off)
Green LED: on.

Datasheet Victron Blue Smart IP67 Charger 12V 25A 230VAC - BPC122547006

See Victron Blue Smart IP67 Charger 12V 25A 230VAC - BPC122547006 - BPC122547006

Additional information

Weight2,4 kg
Dimensions6,5 × 21,9 × 9,9 cm

Product reviews

Reviews

There are no reviews yet.

Be the first to review “Cargador Victron Blue Smart IP67 12V 25A 230VAC – BPC122547006”

Delivery times

At FVComponentes.com we have stock of the references with the highest rotation, however our catalog is so wide and economical because with many of the references we work under order. This means that the delivery time can be extended for 1-2 weeks + subsequent shipment by us. Thanks to this we can offer super competitive and attractive prices to the customer difficult to match. If you wish, you can write us to the chat on the page, call us at 968 97 83 01 or write to us at comercial@fvcomponentes.com to check if we have stock or the delivery time of the component you wish to purchase before finalizing the order.