Victron Argofet 100-2 battery separator - ARG100201020

95,09 VAT inc.

TAXES INC.

Maximum load current (A): 100A
Max. alternator current (A):100A
Number of batteries: 2
Weight (kg): 1,4
Dimensions (mm): 65 x 120 x 200

Product available for sale
Finance your purchase with Cetelem
Reference: ARG100201020 Categories: , Tags: , , , ,

Product information

Al igual que sucede con los puentes de Argodiodo, los puentes Argofet, como el Separador Victron de baterías Argofet 100-2 – ARG100201020, permiten cargar simultáneamente dos o más baterías desde un solo alternador (o desde un solo cargador) sin conectar las baterías entre si. Por lo tanto, descargar la batería auxiliar no provocará que también se descargue la batería de arranque.

Compared to diode bridges, FET bridges have the advantage of virtually zero voltage loss: The voltage drop is less than 0.02 V at low currents and averages 0.1 V at higher currents.

When using Argofet diode bridges, it is not necessary to also increase the alternator output voltage. However, it is highly recommended that the cables be short and of a suitable cross-section.

Example:
When a current of 100 A flows through a cable with a cross section of 50 mm² (AWG 0) and a length of 10 m, the voltage drop in the cable is 0.26 volts. Similarly, a current of 50 A through a cable with a cross section of 10 mm² (AWG 7) and 5 m. long will suffer a voltage drop of 0.35 volts.

Alternator power supply input

Some alternators require a DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is connected directly to the battery. However, if a diode bridge or FET separator is inserted, any voltage/current return from the batteries to the B+ output will be prevented, and the alternator will not be activated.
The new Argofet diode bridges have a special current-limiting energized input that will feed the B+ output when the motor start/stop switch is closed.

Victron Battery Separator Argofet 100-2 Two batteries 100A - ARG100201020

Ficha técnica Separador Victron de baterías Argofet 100-2 – ARG100201020

Ver ficha técnica del Separador Victron de baterías Argofet 100-2 – ARG100201020

Additional information

Weight1,4 kg
Dimensions6,5 × 12 × 20 cm

Product reviews

Reviews

There are no reviews yet.

Be the first to review “Separador Victron de baterías Argofet 100-2 – ARG100201020”

You may also be interested in

Victron Battery Separator Argofet 100-2 Two batteries 100A - ARG100201020Victron Argofet 100-2 battery separator - ARG100201020
95,09 VAT inc.