Inverter Victron Multiplus Compact 12V 1600VA 70-16A - CMP12161620000

Inverter Victron Multiplus Compact 12V 1600VA 70-16A

Two AC outputs

The main output has a "no-break" function. The Victron Multiplus Compact Inverter 12V 1600VA 70-16A takes over the supply to the connected loads in the event of a blackout or grid/generator disconnection. This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment continue to operate without interruption.
The second output is only active when one of the MultiPlus inputs has AC power. Devices that should not discharge the battery, such as a water heater, for example, can be connected to this output (second output available on models rated at 3kVA or more).

Virtually unlimited power due to parallel operation

Up to 6 Multis such as the Victron Multiplus Compact Inverter 12V 1600VA 70-16A can be operated in parallel to achieve higher power output. Six 24/5000/120 units, for example, will give an output power of 25 kW/30 kVA and a load capacity of 720 amps.

Three-phase operating capacity

In addition to parallel connection, three units of the same model can be configured for a three-phase output.
But that's not all: up to 6 sets of three units can be connected in parallel to provide 75 kW / 90 kVA output power and over 2000 amps of load capacity.

PowerControl - Limited power from generator, shore power or mains power

The Victron Multiplus Compact Inverter 12V 1600VA 70-16A is a very powerful battery charger. Therefore, it will use a lot of current from the generator or from the grid (almost 10A per 5kVA Multi at 230 VAC). A maximum current from the generator can be set on the Multi Control Panel.

The MultiPlus will take over other AC loads and use the excess current for charging, thus avoiding overloading the generator or shore power.

PowerAssist - Increased electrical capacity of shore power or generator

This function takes the PowerControl principle to another dimension. It allows the Victron Multiplus Compact Inverter 12V 1600VA 70-16A to complement the capacity of the alternative source.

When a power peak is required for a short period of time, as is often the case, the MultiPlus will immediately compensate the possible lack of power from the mains or generator current with power from the battery. When the load is reduced, the excess power is used to recharge the battery.

Solar energy: AC power available even during a blackout

The MultiPlus can be used in PV systems, whether grid-connected or not, and in other alternative electrical systems.

System configuration

• In the case of a stand-alone application, if the configuration has to be changed, this can be done in a matter of minutes by means of a DIP switch setting procedure.
• Parallel or three-phase applications can be configured with the VE.Bus Quick Configure and VE.Bus System Configurator software.
• Off-grid, grid-interactive and self-consumption applications involving grid-connected inverters and/or MPPT solar chargers can be configured with Wizards (application-specific software).

On-site monitoring and control

Several options are available: Battery Monitor, Multi Control Panel, Color Control GX and other devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote monitoring and control

Color Control GX and other devices.
Data can be stored and displayed free of charge on the web VRM (Victron Remote Management).

Remote configuration

Data can be accessed and system settings can be changed with a Color Control GX and other devices if connected to Ethernet.

Datasheet Victron Multiplus Compact Inverter 12V 1600VA 70-16A - CMP121620000

View Victron Multiplus Compact Inverter 12V 1600VA 70-16A - CMP121620000 datasheet

Download Victron Multiplus schematic diagram for camper in PDF

Enter our blog and download in PDF the diagram to wire and connect your Victron Multiplus inverter in a camper van. You can find the diagram and much more technical information in our new blog section.

Click to download our Victron Multiplus schematic of our blog.