You must be logged in to post a review.
- Free shipping to mainland Spain for orders over 300€.
864,73€ VAT inc.
The electric vehicle charger Fronius WattPilot GO 22J is the best smart charging solution for electric cars. It allows dynamic charging of photovoltaic surpluses.
The Fronius Wattpilot GO 22J 2.0 is the new intelligent charging solution for electric cars. Electric car drivers will be able to decide how to charge their vehicle. Charging is very cost-effective in combination with a variable electricity tariff. It is very easy to install and is one of the few products on the market capable of automatically switching between single-phase and three-phase surplus charging to get the maximum possible energy from the installation.
- Surplus photovoltaic
- Electric vehicle
The charging process starts automatically when there is a minimum power surplus and adapts to the amount of surplus energy at any given time. After a correct configuration by the installer, this solution ensures that the electric vehicle is automatically charged with the solar energy that is left over during the day instead of feeding it into the grid.
The Fronius WattPilot GO 22J 2.0 electric vehicle charging station is the best way to charge electric vehicles. intelligent charging solution, since allows dynamic charging of photovoltaic surpluses.
Thanks to the fully automatic single-phase / three-phase switchingIn this way, it is possible to make optimal use of the photovoltaic power surplus from 1.38 to 22 kW of power.
The WattPilot is also compatible with electricity tariffs with hourly discrimination. This means that you can use the power grid for very economical loading at night during during off-peak periods of low tariffs.
Integrated RFID sensor: Charging will only start if the charging base is activated by a valid chip card (RFID).
In order to manage and control the charging process with the Fronius WattPilot charging base, the Solar.WattPilot app (iOS and Android) is available. Using your smartphone, you can control and manage the entire charging process in a simple and easy way.
Frequency (Input) | 50 Hz |
---|---|
Types of network connection | TT / TN / IT |
Main connections | CEE32 connector red 5-pole incl. neutral conductor |
Rated voltage | 230 V (single phase) / 400 V (three-phase) |
Rated current | 6-32A single-phase or three-phase |
Consumption in standby mode | 1.9 W (dark LED), 4.2 W (light LED) |
Charging plug | Type 2 connector with mechanical locking |
Residual current device | 30 mA AC, 6 mA DC |
Power cable cross section | 6 mm 2 |
Maximum load power | 22 kW |
Dimension / width | 146 mm |
---|---|
Dimension (height) | 251 mm |
Dimension (depth) | 96 mm |
Weight | 1.89 kg |
Weight with packaging | 3.25 kg |
Protection class | IP 54 (IP44 with cable type 2 connected) |
Installation | Indoor and outdoor installation |
Ambient temperature range | From -25 °C to +40 °C (without direct solar radiation) |
Humidity | 5% – 95% |
Maximum altitude | 2000 m |
Impact resistance | IK08 |
Photovoltaic optimization | 1.38-22 kW dynamic PV load (single-phase to three-phase automatic switching) |
Network connection | WLAN* WLAN* WLAN* WLAN* WLAN* WLAN* WLAN* WLAN* WLAN |
Type of installation | Hanging in vertical position |
Average ambient temperature for 24 hours | Max. 35° C |
Weight | 2 kg |
---|---|
Dimensions | 15 × 26 × 10 cm |
You must be logged in to post a review.
At FVComponentes.com we have stock of the references with the highest rotation, however our catalog is so wide and economical because with many of the references we work under order. This means that the delivery time can be extended for 1-2 weeks + subsequent shipment by us. Thanks to this we can offer super competitive and attractive prices to the customer difficult to match. If you wish, you can write us to the chat on the page, call us at 968 97 83 01 or write to us at comercial@fvcomponentes.com to check if we have stock or the delivery time of the component you wish to purchase before finalizing the order.
Reviews
There are no reviews yet.