You must be logged in to post a review.
- Free shipping to mainland Spain for orders over 300€.
361,72€ VAT inc.
Input voltage: 230 VAC (range: 210 - 250 V)
DC input voltage: 290 - 355 VDC
Frequency: 45-65 Hz
Power factor: 0,7
House battery charging current: 30/50A
Low current mode: 15/25A
Weight: 3.5 kg
Dimensions: 180 x 249 x 100 mm
This Victron Phoenix Smart IP43 12/30 (3) 230V charger offers a wireless solution to configure, monitor, control, update and synchronize Phoenix Smart IP43 chargers.
In addition, it has a second output that is limited to approximately 4 A and a slightly lower output voltage, designed especially for charging starter batteries.
Each of the outputs can supply the full rated output current, although the three outputs combined will never exceed the rated current of the charger.
The Victron Phoenix Smart Charger IP43 12/30 (3) 230V automatically adjusts the output voltage to compensate for the voltage drop in the DC cables when DC current increases. Refer to the manual for additional details.
The Phoenix Smart Charger uses an "adaptive" battery management system that adapts to different types of batteries. This algorithm automatically optimizes the charging process according to battery usage.
When the discharge is low, as in the case of a yacht connected to the pontoon, the absorption charging phase is shortened to avoid overcharging the battery. After a deep discharge, the absorption charge time is automatically increased to ensure a complete recharge of the battery.
The charger prevents damage from over-gassing by limiting the rate of voltage increase once the gassing voltage is reached during fast charging.
The storage mode is activated when the battery has not been discharged in 24 hours, reducing the float voltage to minimize gassing and corrosion of the positive plates. It is adjusted weekly to avoid battery problems.
The charger can be controlled by a relay or an optocoupler connected to a Li-Ion BMS to switch on/off or control voltage and current via Bluetooth.
The charging algorithm can be programmed via Bluetooth or the VE.Direct interface, with three pre-programmed charging algorithms available.
A Smart Battery Sense sensor or BMV-712 Smart battery monitor can be used to communicate battery voltage and temperature to one or more Phoenix Smart IP43 chargers.
Remote on/off can be configured via a specific switch, relay or cable connection. Refer to the manual for precise details.
Offers a wired data connection to GX devices, such as GX sowand other devices, by enabling the Instant Readout function via VictronConnect remotely from the VRM.
The relay can be programmed via VE.Direct or Bluetooth to trigger alarms and other events.
You can pair two or more Phoenix Smart IP43 chargers in a VE.S network for synchronized charging.
See Victron Phoenix Smart Charger IP43 12/30 (3) -PSC123053085 (3) data sheet
Weight | 3,5 kg |
---|---|
Dimensions | 10 × 24,9 × 18 cm |
You must be logged in to post a review.
At FVComponentes.com we have stock of the references with the highest rotation, however our catalog is so wide and economical because with many of the references we work under order. This means that the delivery time can be extended for 1-2 weeks + subsequent shipment by us. Thanks to this we can offer super competitive and attractive prices to the customer difficult to match. If you wish, you can write us to the chat on the page, call us at 968 97 83 01 or write to us at comercial@fvcomponentes.com to check if we have stock or the delivery time of the component you wish to purchase before finalizing the order.
Reviews
There are no reviews yet.