Aluminum structure kit for 5 vertical panels. 30º. Above ground. Sunfer 09V5_30

Aluminum structure kit for 5 vertical panels - 30º above ground. Sunfer 09V5_30

The aluminum structure kit for 5 vertical panels - 30º above ground. Sunfer 09V5_30 is made of high-strength EN AW 6005A T6 aluminum, specifically designed to be placed on flat roofs or other types of concrete substructures.

It is a pre-assembled support with a standard inclination that can be adjusted to 15º or 30º to place the panels in a vertical position.

It supports modules with a maximum size of 2279 x 1150 mm and a thickness between 30 and 45 mm. It is covered by a wide range of models and manufacturers, such as panels from Victron that you can find on our website.

This structure of Sunfer is designed to withstand winds of up to 150 km/h, which on the Beaufort scale is equivalent to a hurricane wind capable of blowing vehicles away.

This ensures that it can be installed on the vast majority of roofs without risk of damage from exposure to normal wind force.

To guarantee resistance to the maximum design speed, suitable anchors must be used and the ballast indicated by the manufacturer for each situation must be used.

Includes A2-70 stainless steel hardware for mounting. Does not include hardware for surface anchoring.

Technical data sheet of the aluminum structure kit for 5 vertical panels - 30º above ground. Sunfer 09V5_30

See technical data sheet of the aluminum structure kit for 5 vertical panels - 30º above ground. Sunfer 09V5_30

See assembly diagrams of the aluminum structure for 5 vertical panels. 30º. On the ground.