Aluminum structure kit for 3 panels horizontally. 30º. On sheet metal roof. Sunfer 11H3

Aluminum structure kit for 3 panels horizontally at 15º or 30º on a sheet metal roof. Sunfer 11H3

The Sunfer 11H3 aluminum structure kit for 3 panels horizontally at 15º or 30º on a sheet metal roof is made of high-strength EN AW 6005A T6 aluminum, specifically designed to be placed on flat sheet metal roofs or other types of metal substructures. This structure must be anchored to the purlins on which the roof rests. It is a pre-assembled support with a standard inclination that can be adjusted to 15º or 30º to place the panels in a vertical position. It accepts modules of a maximum size of 2279 x 1150 mm and a thickness of between 30 and 45 mm, covering a wide range of models and manufacturers, such as the panels from JA Solar that you can find on our website.

This structure of Sunfer is designed to withstand winds of up to 150 km/h, which on the Beaufort scale is equivalent to a hurricane wind capable of blowing vehicles over. This ensures that it can be installed on the vast majority of decks without risk of damage from exposure to normal wind force. To ensure resistance to the maximum design speed, suitable anchors must be used and the ballast indicated by the manufacturer for each situation must be used.

Includes A2-70 stainless steel hardware for mounting. Does not include hardware for surface anchoring.

Technical data sheet aluminum structure kit for 3 panels horizontally at 15º or 30º on sheet metal roof. Sunfer 11H3

See technical data sheet of the aluminum structure kit for 3 panels horizontally at 15º or 30º. On sheet metal roof. Sunfer 11H3