Aluminum structure kit for 2 vertical panels. Adjustable inclination. Above ground. Sunfer 14.1V2

Aluminum structure kit for 2 vertical panels - Adjustable inclination - Above ground. Sunfer 14.1V2

The Sunfer 14.1V2 aluminum structure kit for 2 panels in vertical adjustable inclination for flat roofs is made of high-strength EN AW 6005A T6 aluminum, specifically designed to be placed on flat roofs or other types of concrete substructures. It is a pre-assembled support for placing the panels in a vertical position. Thanks to its telescopic rail system, it can be mounted at angles from 30º to 50º. It accepts modules with a maximum size of 2279 x 1150 mm and a thickness between 30 and 45 mm, covering a wide range of models and manufacturers, such as panels from JA Solar that you can find on our website.

This structure of Sunfer is designed to withstand winds of up to 150 km/h, which on the Beaufort scale is equivalent to a hurricane wind capable of blowing vehicles over. This ensures that it can be installed on the vast majority of decks without risk of damage from exposure to normal wind force. To ensure resistance to the maximum design speed, suitable anchors must be used and the ballast indicated by the manufacturer for each situation must be used.

Includes A2-70 stainless steel hardware for mounting. Does not include hardware for surface anchoring.

Aluminum structure kit for 2 vertical panels - Adjustable inclination - Above ground. Sunfer 14.1V2

Aluminum structure kit for 2 vertical panels - Adjustable inclination - Above ground. Sunfer 14.1V2