Victron Lithium SuperPack NG
The Battery that Changes Everything
The new generation of Victron lithium batteries with Intelligent integrated BMS. Maximum safety, durability and performance for your solar or mobile installation.
The evolution of the Victron lithium battery
The Victron Lithium SuperPack NG is the new generation of Victron Energy lithium batteries with fully integrated BMS (Battery Management System). Designed to be connected directly without any additional external device.
Unlike older smart batteries, the SuperPack NG features VE.Bus Smart communication to integrate seamlessly with the Victron ecosystem.
Technical specifications
| SuperPack NG - Available models | ||
| Parameter | 25.6V / 50Ah | 12.8V / 100Ah |
| Rated capacity | 50 Ah | 100 Ah |
| Nominal energy | 1280 Wh | 1280 Wh |
| Nominal voltage | 25.6V | 12.8V |
| Life Cycles (80% DoD) | +2500 cycles | |
| Max. discharge current. | 50A continuous | 100A continuous |
| Max. load current. | 50A | 100A |
| Voltage load | 29.2V | 14.6V |
| Operating temperature | -20°C to +50°C | |
| Connection | M8 bolts - Integrated BMS | |
SuperPack NG Lithium vs AGM
Is it worth the jump to lithium? Here are all the facts to help you decide.
Lithium LiFePO4
SuperPack NG
- Life Cycles+2500 cycles
- Depth of discharge (DoD)80-100%
- Charging/discharging efficiency98-99%
- Weight (100Ah 12V)~14 kg
- Monthly self-discharge<3%
- MaintenanceNone
- Initial investmentMayor
AGM / GEL
Sealed lead acid
- Life Cycles300-500 cycles
- Depth of discharge (DoD)50% maximum
- Charging/discharging efficiency80-85%
- Weight (100Ah 12V)~28-30 kg
- Monthly self-discharge3-5%
- MaintenanceUnder
- Initial investmentMenor
🏆 FVComponents verdict: If your installation is in a van, camper van or with intensive daily use → lithium always. For static installations with occasional use → AGM is valid.
How to install the SuperPack NG
Installation is straightforward thanks to the integrated BMS. No need for external management equipment.
⚙️ Load parameters in MPPT
| Parameter | 12.8V (100Ah) | 25.6V (50Ah) |
| Tension absorption | 14.2V | 28.4V |
| Floating tension | 13.5V | 27.0V |
| MPPT battery type | Lithium (select in VictronConnect) | |
| Max. load current | 0.5C = 50A | 0.5C = 25A |
| Low voltage cut-off | 11.0V | 22.0V |
🔌 Installation steps
- Select location (well ventilated, horizontal)
- Connect the pole negative first to terminal B-
- Connect the positive pole to terminal B+.
- Install fuse on positive (near battery)
- Set the MPPT to Lithium with the parameters of the table
- Open the VictronConnect app and verify the SOC
How many batteries do I need?
You can connect up to 5 units in parallel to increase capacity. Here you have guides for the most frequent cases.
Basic van
Consumption ~500Wh/day
SuperPack 12.8V/100Ah
= 1280 usable Wh
- ✅ 12V refrigerator (40W x 24h)
- ✅ LED lights + mobile charging
- ✅ Occasional small TV
Advanced camper
Consumption ~1200Wh/day
SuperPack 12.8V/100Ah
= 2560 usable Wh
- ✅ All of the above
- ✅ Coffee machine 230V (with inverter)
- ✅ 2 days without sunshine of autonomy
Off-grid small
Consumption ~2500Wh/day
SuperPack 25.6V/50Ah
= 5120 usable Wh
- ✅ Cottage or small house
- ✅ Basic household appliances
- ✅ 2 days full autonomy
🔗 Parallel connection
To connect multiple SuperPack NGs in parallel: connect the B+ terminals to each other and the B- terminals to each other with identical section and length. The BMS of each unit will automatically communicate to balance the load.
Ready for the leap to lithium?
The Victron Lithium SuperPack NG is available in our shop in both models. Shipping in 24-48h to all Spain with official Victron warranty.



