Solar panel 24V Victron BlueSolar 215W-24V monocrystalline 4b series - SPM042152402

Solar panel 24V Victron BlueSolar 215W-24V monocrystalline 4b series - SPM042152402

Monocrystalline panels

The monocrystalline silicon cells of the 24V Victron BlueSolar 215W-24V monocrystalline 4b series solar panel are manufactured from Ingots (cylindrical silicon blocks). The four sides of the cylinder are cut and made into sheets with rounded edges. The crystals have a high purity and therefore the efficiency of the cells is increased. The plates of this material are usually darker, mostly black in colour.

This solar panel 215w 24v monocrystalline is able to produce considerably more energy in less space, so they are more efficient. For this reason, a 24v solar panel is a choice to consider if you have a small surface area for the installation of the panels. By producing more energy in a smaller area, greater savings can be achieved than with polycrystalline panels. 

Features of the Victron BlueSolar 24V Solar Panel 215W-24V monocrystalline 4b series

• This 24v solar panel offers exceptional performance with low brightness and high light sensitivity across the entire solar spectrum.
• The advanced EVA (ethylene vinyl acetate) encapsulation system with triple-layer back sheets meets the highest requirements for high-voltage operation.
• The tempered glass of this 24v solar panel is of high transmission and high quality providing improved hardness and impact resistance.
• A sturdy galvanised aluminium frame allows the modules to be installed on the roof using various standard mounting systems.
• The junction box of this 215w 24v solar panel is sealed, watertight and multifunctional. In this way, it provides high levels of safety.
• High-performance bypass diodes minimise power drops caused by shadowing.
• Pre-wired with PV-ST01 quick-connect connectors.

Specifications of the Victron BlueSolar 215W-24V Monocrystalline 24V Solar Panel 4b series

• Weight: 11,7 Kg
• Dimensions: 1580x705x35 mm
• Power rating: 215W
• Max. power voltage 40,1V
• Max. power current 5,36A
• Open circuit voltage: 46,01V
• Short-circuit current: 5,65V

Warranties for this 24V solar panel

For BlueSolar solar panels, this warranty extends for a limited 25 years on power delivery and performance. It also guarantees the quality of materials and the professionalism of its installers, offering a 5-year limited warranty on materials and workmanship.

Victron BlueSolar 215W-24V 24V Solar Panel Installation

• Always follow the instructions and safety precautions.
• The glass surface of the modules may not be drilled or any additional drilling as this will void the warranty.
• For standard installation, the modules must be securely attached to the mounting structure using four anchor points.
• In windy or snowy areas, the use of additional fixing points is recommended.
• The structural load calculation is the responsibility of the system designer or installer.

Assembly instructions

• Only use the pre-drilled mounting holes in the module frame.
• The most common installation is done by fixing the module to the four symmetrical points on the inside of the frame.
• If installed in windy or snowy areas, it is mandatory to use the eight available mounting holes.
• Do not lift the module by the junction box or electrical cables.
• Do not step or stand on the module.
• Do not drop the module or allow objects to fall on it.
• To prevent glass breakage, do not place heavy objects on the module.
• Do not rest the module abruptly on any surface.
• Improper transport or installation may damage the module.

Datasheet 24V Solar Panel Victron BlueSolar 215W-24V monocrystalline series 4b - SPM042152402

View Victron BlueSolar 215W-24V monocrystalline series 4b - SPM042152402 24V solar panel data sheet

Manual Solar Panel 24V Victron BlueSolar 215W-24V monocrystalline 4b series - SPM042152402

View Victron BlueSolar 215W-24V Monocrystalline 24V Solar Panel 4b series manual