Maxge Alpha+ 2P, 10A, C-curve, 6kA - EPB63ME2C10

Maxge Alpha+ 2P, 10A, C-curve, 6kA - EPB63ME2C10

The Maxge Alpha+ 2P, 10A circuit breaker is a circuit breaker designed to protect single-phase circuits easily and effectively against overloads and short circuits, offering a safe, reliable and easy to integrate solution for all types of electrical panels.

Thanks to its two-pole configuration (2P), its rated current of 10 A, tripping curve C and breaking capacity of 6 kA, it is a circuit breaker widely used in domestic installations as well as in small shops and automation environments, ideal when reliable protection is required for lighting, sockets or small electrical equipment.

This circuit breaker combines thermal protection and magnetic protection in a single device, allowing the power supply to be cut off when a current anomaly is detected, preventing damage to wiring, connected equipment and reducing the risk of electrical faults or accidents.

Main features of the Maxge Alpha+ 2P, 10A circuit breaker

Complete phase and neutral protection

Being from 2-pole (2P), This circuit breaker protects and disconnects the phase and neutral at the same time. This ensures that the circuit is completely isolated when the circuit breaker is manually tripped or switched off, increasing safety during maintenance or servicing work on the electrical panel.

This type of protection is particularly recommended for single-phase installations, lighting circuits, specific sockets, socket lines with moderate consumption, auxiliary and control circuits, and installations where a total circuit cut-off is required.

Typical use in domestic installations

With a 10 ampere rated current, This circuit breaker is perfect for low to medium consumption circuits, which are very common in homes, offices and small premises.

It is typically used to protect indoor lighting, sockets with moderate loads, small household appliances, basic electronic equipment and auxiliary circuits in switchboards.

Provided that the installation is properly carried out, the circuit breaker guarantees stable, safe operation without unnecessary outages.

Stability without nuisance tripping

The firing curve C allows the circuit breaker to withstand moderate current peaks, such as those that occur when switching on certain electrical appliances, without causing unnecessary tripping.

This means fewer unplanned outages, greater convenience of use, and good protection against real overloads and short circuits.

Therefore, the C-curve is one of the most commonly used curves in general installations.

High resistance

Your 6 kA breaking capacity means that this circuit breaker is capable of safely interrupting short-circuit currents of up to 6,000 amperes without damage or loss of protective properties.

This level of breaking capacity is more than sufficient for homes, commercial premises, secondary switchboards and standard low-voltage electrical installations.

In other words, this circuit breaker provides a reliable level of protection for everyday use.

Quick installation and practical design

The Maxge Alpha+ 2P, 10A is designed for DIN rail mounting, It is quick and easy to install in any standard electrical panel.

Your compact 36 mm wide design (18 mm per pole), helps to optimise the space available in the frame and features window for circuit marker y a visual status signalling (on/off), The circuit it protects can be easily identified.

In addition, it has some terminals that are prepared for cables suitable for this current (16mm² in flexible cable and 25mm² in rigid cable).
This ensures firm and secure connections.

Maxge Alpha+ 2P, 10A, C-curve, 6kA - EPB63ME2C10 - Operation and Applications

This circuit breaker protects the circuit in two ways:

• Thermal protection (overload): cuts off the current if there is a sustained overload, preventing both overheating of the cables and possible damage to the installation.
• Magnetic protection (short circuit): acts almost instantly when there is a strong short-circuit. When this happens, this circuit breaker cuts off the power supply and protects both the installation and the connected equipment.

It is an ideal solution for switchboards in homes, small shops and offices, lighting circuits and sockets, and auxiliary protections.

Main advantages of Maxge Alpha+ 2P, 10A

This circuit breaker has the following advantages:

• Complete phase and neutral protection.
• It has 10A, one of the most widely used ratings in single-phase installations.
• Balanced and versatile C-curve.
• 6 kA breaking capacity, suitable for domestic and commercial use.
• Easy DIN rail installation and simple maintenance.
• Compact, robust and reliable design.
• Compliance with international quality norms and standards.

Maxge Alpha+ 2P, 10A, C-curve, 6kA - EPB63ME2C10 Technical Information

Data sheet Maxge Alpha+ 2P, 10A, Magnetotermico Maxge Alpha+ 2P, 10A