Aluminium structure kit for 5 vertical panels. 30º. Above ground. Sunfer 09V5_30

Aluminium structure kit for 5 vertical panels - 30º above ground. Sunfer 09V5_30

The aluminium structure kit for 5 vertical panels - 30º above ground. Sunfer 09V5_30 is made of high-strength EN AW 6005A T6 aluminium, specifically designed to be installed on flat roofs or other types of concrete substructures.

It is a pre-assembled bracket with a standard inclination that can be adjusted to 15° or 30° to position the panels vertically.

It supports modules up to a maximum size of 2279 x 1150 mm and a thickness of between 30 and 45 mm. It is covered by a wide range of models and manufacturers, such as panels from Victron that you can find on our website.

This Sunfer structure is designed to withstand winds of up to 150 km/h, which on the Beaufort scale is equivalent to a hurricane force wind capable of blowing vehicles over.

This ensures that it can be installed on the vast majority of roofs without risk of damage from exposure to normal wind force.

To ensure resistance to the maximum design speed, suitable anchorages shall be used and the ballast indicated by the manufacturer for each situation shall be used.

Includes A2-70 stainless steel screws for assembly. Does not include screws for surface anchoring.

Technical sheet of the aluminium structure kit for 5 vertical panels - 30º above ground. Sunfer 09V5_30

See technical data sheet of the aluminium structure kit for 5 vertical panels - 30º above ground. Sunfer 09V5_30

See assembly diagrams of the aluminium structure for 5 vertical panels. 30º. On the ground.