My account

Inverter Charger 48V Victron Quattro II 48/5000 70-50/50 - QUA482504010

Inverter Charger 48V Victron Quattro II 48/5000 70-50/50 - QUA482504010 (sidetop)

Inverter Charger 48V Victron Quattro II 48/5000 70-50/50 - QUA482504010 (connections2)

Inverter Charger 48V Victron Quattro II 48/5000 70-50/50 - QUA482504010 (connections)

Inverter Charger 48V Victron Quattro II 48/5000 70-50/50 - QUA482504010

1.322,80€

TAXES INC.

Continuous power output: 5000VA
Peak Power: 9000W
Working Voltage: 48V
Efficiency: Pure Sine Wave

Producto disponible para la venta

+info

Finance your purchase with Cetelem

+info

Reference: QUA482504010 Categories: Investors, Inverter Chargers 48V to 220V

Product information

Inverter Charger 48V Victron Quattro II 48/5000 70-50/50 Inverter Charger Features - QUA482504010

ESS functionality (energy storage system)

The Inverter Charger 48V Victron Quattro II 48/5000 70-50/50 - QUA482504010 can be connected to two independent AC sources, e.g. the utility grid and a generator, or two generators. The Quattro-II will automatically connect to the active source.

PowerControl and PowerAssist

A maximum grid or generator current can be set. The 48V Victron Quattro II 48/5000 70-50/50 - QUA482504010 inverter charger will take other AC loads into account and use what is left over to charge the battery, thus preventing the generator or the grid from being overloaded (PowerControl function). In cases where maximum power is only needed for a limited period, the Quattro-II will compensate for insufficient generator or grid power with power from the battery. When the load is reduced, the excess power is used to recharge the battery.

Solar power: AC power available even in case of grid failure

The 48V Victron Quattro II 48/5000 70-50/50 - QUA482504010 48V inverter charger can be used in grid-connected photovoltaic systems as well as in off-grid and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.

Two AC outputs

The main output has no interrupting function. The Quattro-II takes over the supply to the connected loads in the event of a mains failure or disconnection of the generator/earthing. This happens so quickly (less than 20 milliseconds) that the electronic equipment will continue to operate without interruption. The second output is only active when AC power is available at the input.

48V Victron Quattro II 48/5000 70-50/50 Inverter Charger 48V parallel and three-phase operation - QUA482504010

Up to 6 Quattros II can be operated in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA of output power with 420A of load capacity. In addition to parallel connection, three units of the same model can be configured for three-phase output, and up to 6 sets of three units can be connected in parallel per phase to provide a 75 kW / 90 kVA inverter and over 1200A of load capacity.

On-site system configuration, monitoring and control

Settings can be changed in a matter of minutes with the VEConfigure software (PC or laptop and Mk3-USB interface required). Various monitoring and control options are available: Cerbo GX , Colour Control GX, Venus GXOcto GX, Octo GX, CANvu GX, laptop, computer, Bluetooth, Battery Monitor, Digital Multi Control Panel.

Remote configuration and monitoring

Install a Cerbo GX or another GX product to connect to the Internet. Operating data can be stored and viewed on the VRM (Victron Remote Management) website.