Inverter 48V Victron Phoenix 48/1600 Smart VE Direct Schuko - PIN482161000

Inverter 48V Victron Phoenix 48/1600 Smart VE Direct Schuko - PIN482161000

The Victron Phoenix 48V 48/1600 Smart VE Direct Schuko Inverter - PIN482161000 is an efficient and reliable inverter. Built on the proven Phoenix inverter platform, it now comes with a new slimmer design in an all-metal housing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.

It is powerful enough to power the most common devices in your car, boat, caravan or even in your home. Thanks to its toroidal transformer it has a high capacity to cope with power peaks, a stable voltage and frequency and a high quality sine wave.

Installation is now much simpler than before, with terminals that are much more accessible to the installer, allowing for a more professional finish.

Its integrated Bluetooth makes configuring your high-power inverter easier than ever. Configure alarms, alarm relay, voltage outages, output voltage, frequency, eco mode and more, all from the app. VictronConnect.

Built-in Bluetooth: fully configurable with a tablet or smartphone

- Low battery voltage alarm.
- Low battery voltage shutdown and restart levels.
- Dynamic disconnection: load-dependent disconnection level.
- Output voltage: 210 - 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode level sensor.
- Alarm relay.

Follow-up:

- Input and output voltage, load and alarms.

VE.Direct communication port

The VE.Direct port can be connected to a computer (a VE.Direct interface cable is required) to configure and monitor the same parameters.

Proven reliability of the 48V Inverter Victron Phoenix 48/1600 Smart VE Direct Schuko - PIN482161000

The full-bridge plus toroidal transformer topology has proven its reliability over many years.
The inverters are short-circuit proof and protected against overheating, either due to overload or high ambient temperature.

ECO Mode

In ECO mode, the Victron Phoenix 48V 48/1600 Smart VE Direct Schuko - PIN482161000 48V inverter will go into standby when the load drops below a preset value. Once in standby, the inverter will activate briefly every 2.5 seconds (adjustable).
If the load exceeds the preset level, the inverter will remain on.

High starting power 48V Inverter Victron Phoenix 48/1600 Smart VE Direct Schuko - PIN482161000

Necessary for starting loads such as converters for LED lamps, halogen lamps or power tools.

Remote on/off switch

A remote On/Off switch or relay can be connected to a two-phase connector.
Alternatively, the H (left) terminal of the two-phase connector can be switched to battery positive, or the L (right) terminal of the two-phase connector can be switched to battery negative (or to a vehicle chassis, for example).

Inverter 48V Victron Phoenix 48/1600 Smart VE Direct Schuko - PIN482161000

View Victron Phoenix 48V Inverter 48/1600 Smart VE Direct Schuko - PIN482161000