Victron SmartSolar MPPT 150/70-Tr VE.can - SCC115070411411

Victron SmartSolar MPPT 150/70-Tr VE.can - SCC115070411 controller with optional display. Control and configure via Bluetooth your device while receiving information such as battery voltage and current, photovoltaic voltage and current and historical data.

Ultra Fast Maximum Power Point Tracking (MPPT)

Especially under cloudy skies, when light intensity changes continuously, an ultrafast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers, and by up to 10% compared to slower MPPT controllers.

Advanced detection of Maximum Power Point in case of partial cloudiness

In case of partial cloudiness, there may be two or more maximum power points (MPP) on the load voltage curve.
Conventional MPPTs usually select a local MPP, which is not necessarily the optimal MPP.
SmartSolar's innovative algorithm will always maximize energy harvesting by selecting the optimal MPP.

Exceptional conversion efficiency

No fan. Maximum efficiency exceeds 98%.

Flexible loading algorithm

A fully programmable charging algorithm and eight pre-programmed charging algorithms, which can be selected with a rotary selector (see manual for more information).

Extensive electronic protection

Over-temperature protection and power reduction in case of high temperature.

Short-circuit and reverse polarity protection in PV panels.

PV reverse current protection.

Integrated Bluetooth Smart

The wireless solution for configuring, monitoring, updating and synchronizing SmartSolar charge controllers.

Internal temperature sensor and optional external battery voltage and temperature sensor via Bluetooth

A Smart Battery Sense sensor or a BMV-712 Smart battery monitor can be used to communicate battery voltage and temperature to one or more SmartSolar charge controllers.

VE.Can: the multi-controller solution

Up to 25 units can be synchronized with VE.Can.

VE.Direct or VE.Can

For a wired data connection to a Color Control GX panel, other GX products, a PC or other devices.

Remote On/Off

To connect to a VE.BUS BMS, for example.

Programmable relay

It can be programmed to schedule an alarm, or other events.

Optional: SmartSolar Connectable LCD Display

By removing the rubber protector from the socket on the front of the controller, the auxiliary display can be connected.

The SmartSolar VE.Can charger also has a VE.Direct port like all other MPPT solar chargers. This port can be used for tracking individual units or for outdoor lighting control. The remote on/off connector can be controlled externally with a third device such as a lithium battery. An optional connectable LCD control or display provides access to real-time data and allows the system to be configured and managed from the front of the device itself.

Datasheet Victron SmartSolar MPPT 150/70-Tr VE.can Controller - SCC115070411

See Victron SmartSolar MPPT 150/70-Tr VE.can - SCC115070411 datasheet