Victron BlueSolar PWM-LCD and USB 48V-10A controller - SCC040010050

BlueSolar Regulator Features Victron PWM-LCD and USB 48V-10A - SCC040010050

• Liquid crystal display: For tracking and configuration.
• Load output: The battery can be prevented from over-discharging by connecting all loads to the charging output. This output will disconnect the load when the battery has discharged to a preset voltage. Some loads (especially inverters) are best connected directly to the battery, and the inverter remote control to the load output. A special interface cable may be required; please refer to the manual. The connection and disconnection voltages are adjustable.
• Day/night programming of the load output: This option allows to pre-set the ON-time after twilight.
• Programmable battery charging algorithm: Pre-programmed algorithms for AGM, GEL, flooded or LiFePO4 batteries (only with internal BMS).
• Two 5-volt USB outputs: Maximum current (both outputs together): 2A

Datasheet BlueSolar Victron PWM-LCD and USB Controller 48V-10A - SCC040010050

See BlueSolar Victron PWM-LCD and USB 48V-10A Regulator - SCC040010050 datasheet