Victron SuperPack 25.6V-50Ah (M8) lithium battery - BAT524050705

Victron SuperPack lithium battery 25.6V-50Ah (M8)

Integrated BMS and safety switch

SuperPack series batteries, such as the Victron SuperPack 25.6V-50Ah lithium battery, are very easy to install and require no additional components.
The internal switch will disconnect the battery in case of excessive discharge, overcharge or too low or high temperature.

Abuse-proof

A lead-acid battery will fail prematurely due to sulfation:
- if it operates in deficit mode for long periods of time (i.e., if the battery is rarely or never fully charged).
- if left partially discharged or, even worse, completely discharged.

A lithium-ion battery does not need to be fully charged. Its service life will even improve if it is partially, rather than fully, charged. This is a decisive advantage of lithium-ion batteries over lead-acid batteries.

SuperPack batteries from Victron will cut off the charging or discharging current when the maximum rated capacity is exceeded.

Efficient

In some applications (especially off-grid applications), energy efficiency can be of crucial importance.
The full cycle energy efficiency (discharge from 100 % to 0 % and recharge to 100 %) of a typical lead-acid battery is 80 %.
The full cycle efficiency of a lithium ion battery is 92 %.

The charging process of lead-acid batteries becomes particularly inefficient when the 80 % state of charge is reached, resulting in efficiencies of 50 % or even lower in solar systems where several days of energy reserves are needed (batteries operating between 70 % and 100 % of charge).

In contrast, a lithium-ion battery will still achieve 90 % efficiency under mild discharge conditions.

Can be connected in parallel

Batteries can be connected in parallel. Series connection is not possible.
Use only in vertical position.

Datasheet Victron SuperPack 25.6V-50Ah (M8) lithium battery - BAT524050705

See Victron SuperPack 25.6V-50Ah (M8) lithium battery datasheet - BAT524050705