My account

Toscano COMBI2 P63 T15 combined surge protection 10002473 10002473

202,82€ VAT inc.

TAXES INC.

Operating voltage: 240 VAC
Housing protection: IP20
Protection: TYPE II
Permanent protection values:
Tripping voltage: 265 VAC ±2%
Transient protection values:
Maximum Imax current: 15 kA
Rated current In: 8 kA

Product available for sale

+info

Finance your purchase with Cetelem

+info

Reference: 10002473 Category: Electrical equipment Label: Tuscan

Product information

Toscano COMBI2 P63 T15 combined surge protection 10002473 10002473

The Toscano COMBI2 P63 T15 combined surge protection 10002473 protects from permanent overvoltages caused by increases in the mains voltage, and of the transient overvoltages caused by lightning strikes or network switching, on installations single-phase.

Toscano's COMBI2 P63 T15 combines in the same component the General Automatic Circuit Breaker (IGA), a tripping coil and the Vigivolt V2T, offering protection functions against transient and permanent overvoltages, which makes it a particularly useful element in homes.

What are permanent overvoltages?

Permanent overvoltages are voltage surges above the rated value that may be due to a neutral break in an electrical network. They cause overheating of electrical equipment, reducing its service life or leading to its destruction. Protection devices against permanent and transient overvoltages are installed next to the main circuit breaker (IGA) of the main switchboard, causing it to trip in case of overvoltage.

What are transient overvoltages?

Transient overvoltages are voltage peaks reaching kilovolt values, usually caused by lightning strikes or due to mains switching, which cause severe damage to electrical and electronic equipment. Transient surge protectors act by shunting to ground the high current generated when the overvoltage reaches a set value. Toscano offers a complete solution of arresters necessary to configure a correct cascade protection from the source of the surge to the receivers.

SPECIFICATIONS	Values
General
Operating voltage	240 VAC
Frequency	50-60 Hz
Maximum terminal cross-section	25 mm² (1.5 in.)
Dimensions (W x H x D) mm	72 x 90 x 71
Environmental margins	-20º...+70º C / 80% H.R.
Protection	IP20
Mounting	Rail DIN35
No. of DIN modules	4
Product standards	UNE-EN 50550 / UNE-EN 61643-11 / UNE-EN 60898
Permanent
Firing voltage	265 VAC ±2%
Reply	according to standard
Transitory
Maximum Imax intensity	15 kA
Rated current In	8 kA
Protection level Up	≤1.5 kV
Class	II
IGA
Rated current	63A
Curve	C
Cutting power	10 kA