Upower Lithium Battery 12.8V/100Ah - UE-12Li100

271,34

TAXES INC.

Nominal voltage: 12.8 V
Rated capacity: 100 Ah
Total energy: 1280 Wh
Number of cycles: 2500 cycles at 100%

- +
Product available for sale
Finance your purchase with Cetelem
Reference: UE-12Li100 Categories: ,

Details of the Upower Lithium Battery 12.8V/100Ah - UE-12Li100

Upower Lithium Battery 12.8V/100Ah - UE-12Li100

The Upower 12.8V/100Ah is a lithium-ion (LiFePO₄) battery for those looking for a reliable, long-lasting and uncomplicated way to store energy.
It is a very efficient battery and much more modern than traditional lead-acid batteries.

Thanks to its LiFePO₄ lithium technology, this battery lasts for many more years, is much safer and virtually maintenance-free.
It is ideal if you want stable energy and forget about constant revisions.

In practice, this battery gives you 12 volts and a real capacity of 100 amps, which means you can use almost all of its power without fear of ruining it.
Unlike AGM or Gel batteries, with this battery there are no sudden voltage drops or loss of performance as the battery discharges.

In addition, it incorporates an internal protection system (BMS) that takes care of the inside: it prevents overloads, excessive discharges, short circuits or temperature problems.
You use it, and it protects itself.

It is commonly used in caravans, campers, boats, tour buses, solar systems, electric vehicles, emergency lighting, security systems, equipment that needs a reliable and constant power source, and generally anywhere a reliable battery that won't fail is needed.

Upower 12.8V/100Ah battery main features

Technology and performance

The Upower battery operates at a nominal voltage of 12.8 volts, with a useful capacity of 100 amp hours, a maximum charge and discharge capacity of up to 100 A and a useful energy of 1,280 Wh. In short: it gives you power for longer and you use almost all of it.
Its charging voltages are adapted to the LiFePO₄ profile, with 14.6 V in the initial charging phase (absorption/bulk) and 13.8 V in the float stage (float), while the discharge cut-off voltage is 10 V to protect the cells.

Its cycle life is over 2,500 cycles at 100 % depth of discharge (DoD), which means it can last up to 10 times longer than many conventional lead-acid batteries, so it has a very long life and no loss of performance.

In addition, its discharge curve is almost flat, so the voltage remains very stable almost until the end of the discharge, so your equipment works just as well even if the battery is already quite discharged.
This is especially valuable in systems where a stable 12 V source is needed for electric motors, lighting, pumps, electronics or solar inverters.

Design

The Upower battery is designed in a monoblock format, using lithium iron phosphate cells (LiFePO₄). This type of lithium does not heat up easily or have risks (fire or premature failure) like other types of batteries, making it a very safe choice.

It is internally configured with series and parallel cells, allowing for balanced and even load distribution and safe and stable operation even under heavy use.

Its compact and robust design makes it easy to install in small spaces, taking up much less space than a similar AGM or GEL battery, which is much appreciated in caravans, boats or mobile installations.

In addition, this battery can work in parallel configurations (up to 4 units), allowing to expand both the voltage and the total capacity of the battery bank according to the needs of the system.

Intelligent management system (BMS)

The Upower 12.8V/100Ah has a built-in intelligent battery management system (BMS), which takes care of the battery at all times. It controls how the internal cells are charged and discharged.

Thanks to this system, the battery protects itself and always operates within safe parameters, extending its lifespan, giving you peace of mind and ensuring consistent charge and discharge cycles.

In addition, the BMS protects the battery against overcharging, over-discharging, short circuits, over-temperature and even extreme environmental conditions, ensuring safe and reliable operation for years to come.

Operational range

The Upower battery can operate smoothly over a wide temperature range, both charging and discharging.

  • Temperature of charge: 0 °C to 45 °C
  • Temperature of unloading: from -20 °C to 60 °C

This makes it suitable for both indoor and outdoor use. If you are not going to use it for a while, it should ideally be stored between -10°C and 35°C.

Installation and maintenance

Thanks to its single-block format, this battery is very easy and quick to install. No complex configuration or advanced technical knowledge is required.

In addition, it is a maintenance-free battery, as it does not need ventilation, does not generate gases, does not require liquid recharging and does not require periodic checks, which makes it a very convenient and safe option in the long term, especially in closed or poorly ventilated environments. You install it and forget about it.

Protections

The Upower 12.8V/100Ah battery is very well protected because it has several built-in protections that extend its life and improve the safety of the system.

It includes overload, over-discharge, over-current, short-circuit and extreme temperature protection, plus additional safety components such as high-temperature thermal fuses, flame-retardant additives and pressure relief valves.

In addition, its housing is IP65 protected, which means that it is dust and splash water resistant, which is very useful for mobile or outdoor installations.

Advantages of the Upower 12,8V/100Ah Battery

The advantages of this battery are many, among them:

  • Long service life.
  • Maximum security.
  • Thousands of charge and discharge cycles.
  • You use almost 100 % of the energy.
  • Integrated BMS.
  • Modular configuration.
  • Maintenance-free.
  • Wide thermal range.

Typical Upower 12.8V/100Ah battery applications

This Upower battery is ideal for a wide variety of applications, including:

  • Energy storage and back-up systems, to ensure power supply during power outages.
  • Residential and commercial solar systems, The energy generated by solar panels is stored.
  • Telecommunications and network equipment, which require a stable and reliable power supply.
  • Portable or emergency equipment, such as lighting systems, charging stations or portable generators.
  • Electric vehicles, caravans and campers, where maintenance-free autonomy is required.
  • Boats and recreational vehicles, to power on-board electrical and electronic systems.

Upower Lithium Battery 12.8V/100Ah - UE-12Li100 Technical Specifications

Feature Value
Battery technology LiFePO₄ (lithium ferrophosphate)
Nominal voltage 12,8 V
Rated capacity 100 Ah
Total energy 1,280 Wh
Standard charging current 20 A
Maximum load current 100 A
Standard discharge current 20 A
Maximum discharge current 100 A
Charging voltage 14,6 V
Minimum capacity 95 Ah
Discharge cut-off voltage 10 V
Internal resistance ≤ 10 mΩ
Life Cycles More than 2,500 cycles
Dimensions (L × W × H) 330 × 172 × 220 mm
Weight 10 kg
Charging temperature 0 °C to 45 °C
Discharge temperature -20 °C to 60 °C
Storage temperature -10 °C to 35 °C
Protections (BMS) Overload, over-discharge, over-current, short-circuit and temperature
Certifications UN 38.8, MSDS, DG Certificate, EC

Upower Lithium Battery 12,8V/100Ah - UE-12Li100 Technical Information

Upower 12.8V/100Ah battery data sheet

Upower 12,8V/100Ah Battery Manual

Upower 12,8V/100Ah battery technical characteristics

Weight and dimensions

Weight 10 kg
Dimensions 33 × 17,2 × 22 cm

User feedback

Delivery deadlines

At FVComponentes.com we have stock of the references with the highest turnover, however our catalogue is so wide and economical because we work with many of the references on request. This means that the usual delivery time of 2-4 working days can be extended to 1-2 weeks + subsequent shipment by us. Thanks to this, we can offer very competitive and attractive prices to our customers that are difficult to match. If you wish, you can write to us via the chat on the website, call us at 968 97 83 01 or write to us at [email protected] to check if we have stock or the delivery time of the component you wish to purchase before finalising your order.