Maxge Alpha+ 4P, 10A, C-curve, 10kA - EPB63H4C10

Maxge Alpha+ 4P, 10A, C-curve, 10kA - EPB63H4C10

The Maxge Alpha+ 4P, 10A automatic circuit breaker is an automatic electrical protection device designed to protect three-phase electrical installations with neutral against overloads and short circuits.

It is particularly suitable for industrial and tertiary use, but can also be used in complex switchboards where a high level of safety and reliability is required in the event of power failures.

Main features of the Maxge Alpha+ 4P, 10A circuit breaker

Configuration and electrical capacity

Firstly, it is notable for its pole configuration, since it has 4 poles (3 phases + neutral), This means that complete three-phase networks can be effectively protected.

It also has a nominal current (In) of 10 amps, which corresponds to the maximum continuous current for which the thermal-magnetic trip is calibrated.

On the other hand, its operating voltage is up to 415/240 V AC, This makes it suitable for most standard three-phase installations.

Firing curve and type of load

With regard to its overcurrent behaviour, it incorporates a trigger curve type C, This allows transient overcurrents of 5 to 10 times the rated current to be tolerated before tripping.
This makes it particularly suitable for circuits with inductive loads or those that generate moderate current peaks on start-up, such as small motors, lighting systems with ballasts or light industrial equipment, thus avoiding unnecessary tripping.

Protection capacity

This circuit breaker has a 10 kA (10,000 amperes) breaking capacity.
Thanks to this feature, the device is able to safely interrupt high-current short-circuits without being damaged or allowing dangerous arcs to occur, which significantly increases the safety of the installation.

Connection and installation

On the installation side, the terminals and terminals are designed for copper conductors with cross-sections of up to 25 mm² in flexible cable and 35 mm² in rigid cable.
As a result, it is easy to connect and compatible with most of the cables used in switchboards.

In addition, its DIN rail mounting, Thanks to its standard modular design, it facilitates both integration and maintenance of the device.

Dimensions and design

In terms of design, the circuit-breaker has compact dimensions, with a 72 mm wide (18 mm per pole), The DIN-rail space is optimised.

It also incorporates a visual signalling of the state (on/off), which facilitates quick diagnostics and maintenance.

Finally, it includes a window for circuit marker, The circuit it protects can be clearly identified.

Performance conditions

The circuit breaker is designed to operate in a temperature range from -5 °C to +40 °C.
It is therefore suitable for most industrial and commercial indoor environments.

Regulations and certifications

From a regulatory point of view, it complies with the standard EN/IEC 60898-1, for low voltage circuit breakers.

It also has certifications internationally recognised as CE, RoHS, VDE and KEMA-KEUR, This guarantees high quality, safety and international compatibility.

Maxge Alpha+ 4P, 10A, C-curve, 10kA - EPB63H4C10 - Operation and Applications

This circuit breaker combines two protection mechanisms:

• Thermal sensor, to protect against prolonged overloads (currents slightly above the rated current for a certain time), which could damage cables or equipment.
• Magnetic sensor, which acts immediately in the event of short circuits or serious faults, disconnecting the circuit quickly to prevent major damage, such as damage to cables, equipment or fire hazards.

This switch is designed to protect three-phase circuits in industrial, commercial or more complex switchgear environments where resilience and reliability against electrical faults are required.
Its C-curve and high breaking capacity allow a balance between fast response and tolerance to transient current peaks on start-up, typical of moderate inductive loads, without tripping prematurely.

Main advantages of Maxge Alpha+ 4P, 10A

The advantages of this circuit breaker are as follows:

• Protege effectively against overloads and short circuits in three-phase networks with neutral.
• It offers a high breaking capacity of 10 kA, suitable for demanding environments.
• It incorporates a firing curve C balanced, ideal for multiple industrial applications.
• It presents a modular assembly and allows a easy identification of circuits.
• It is compatible with wide-section cables and with additional accessories.
• It is manufactured in accordance with international regulations, and also has recognised quality certifications.

Technical information about Maxge Alpha+ 4P, 10A, C-curve 10kA - EPB63H4C10

Maxge Alpha+ 4P, 10A circuit breaker technical datasheet

Maxge Alpha+ 4P, 10A circuit breaker technical data