Battery Monitor BMV-700H Victron - BAM010700100

Charge level indicator, back-up time indicator and more

The remaining battery capacity depends on the ampere-hours consumed, the discharge current, the temperature and the age of the battery. Software with complex algorithms is needed to take all these variables into account.
In addition to the basic display options, such as voltage, current and ampere-hours consumed, the Victron BMV-700H Battery Monitor also shows the state of charge, remaining autonomy and power consumed in watts.

Bluetooth Smart

Use the Bluetooth Smart interface to control batteries from Apple or Android smartphones, tablets, macbooks and other devices.

Easy to install

All electrical connections are made to the power shunt's quick connect PCB. The shunt is connected to the monitor via a standard RJ12 telephone cable.
Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no more required.
Also included is a front screen trim plate, square or round, a rear fixing ring and screws for front mounting.

Easy to programme (with your smartphone!)

As a user, you have a quick installation menu, and a more detailed menu with sliding texts, to make the various settings.

Alternatively, you can opt for the quick and easy solution: download the smartphone app (Bluetooth Smart Interface required).

Victron BMV-700H Battery Monitor Standard Features

- Voltage, current, power, ampere-hours consumed and state of charge of the battery
- Remaining autonomy at current discharge rate.
- Programmable visual and audible alarm
- Programmable relay, to disconnect non-critical loads or to start a generator if necessary.
- 500 amp quick connect shunt and connection kit
- Selection of shunt capacity up to 10,000 amps
- Communication port VE.Direct
- Stores a wide range of historical data, which can be used to assess usage patterns and battery condition
- Wide input voltage range: 6.5 - 95 V
- High current measurement resolution: 10 mA (0.01A)
- Low power consumption: 2.9 Ah per month (4 mA) @ 12 V and 2.2 Ah per month (3 mA) @ 24V

Voltage range

60 to 385 VDC. No pre-divider required. Note: ideal for systems with only negative ground (the battery monitor is not isolated from the shunt).

Other battery monitoring options

- Lynx VE.Can shunt

Datasheet Battery Monitor BMV-700H Victron - BAM010700100

View Victron BMV-700H Battery Monitor BMV-700H - BAM010700100 datasheet